Optional Accessories - Nortel 7220 Hardware Installation Manual

Nortel Networks Confidential

Optional Accessories

The following optional accessories are also available for ordering:
•
•
•
•
•
•
The optional accessories are shown in
Wireless Mesh Network Wireless Access Point 7220 Hardware Installation Guide Product release
Omnimount* vertical and side mounting hardware bracket and Ball
mount adapter
Ethernet cables for indoor or outdoor options:
— 25-metre connectorized CAT5 cable (indoor) or CAT5 outdoor-rated
cable
— 50-metre connectorized CAT5 cable (indoor) or CAT5 outdoor-rated
cable
— 100-metre connectorized CAT5 cable (indoor) or CAT5 outdoor-rated
cable
Snap-On Ferrite to be attached to Ethernet Cable upon installation
(Steward, p/n: 28A2025-0A0 - Nortel CPC code: A0643364).
AC Connector Hex wrench tool - for tightening AC power cable plug
(Phoenix-Contact model QSS 19 order number 1670895)
Approved external 5 GHz antennas:
— 13 dBi Huber+Suhner* SPA5600140/14/0/V Planar Antenna
— 18 dBi Andrew Corporation* #FPA5250D06-N
— 23.6 dBi Andrew Corporation* #FPA5250D12-N (Note: Restricted to
outdoor use only)
Printed Hardware Installation Guide (this manual)
Note: The standard package includes parts suitable for the majority of
installations. Additional site specific accessories may be required prior to
installation.
Installing the Wireless AP7220 1-5
Copyright 2004 Nortel Networks
©
Figure 1-3.