Wall Mounting; Time Setting; Repairs; Disposal - Ecom Instruments Ex-Time 40 User Manual

7.3 Wall Mounting

An integral metal bracket located on the rear of the clock enables
the Ex-Time 40 to be suitably mounted on an appropriate wall. The
fixing of the unit must be secure at all times and precautionary
measures must be taken to prevent the Ex-Time 40 from falling
into an area classified as zone 0. For reasons of electrostatic
discharge, completely insulated mounting – e.g. on a purely plastic
wall - is to be avoided.

7.4 Time Setting

The white adjusting wheel on the quartz mechanism is used to
make any necessary time adjustments.

8. Repairs

Repair work is subject to the nationally valid regulations and directives.
We therefore recommend that such work be performed by ecom
instruments GmbH, Germany, as all repairs must be examined to
ensure functional safety.

9. Disposal

Old electrical devices as well as „historical" old electrical devices
from ecom instruments GmbH are supplied for disposal at our ex-
pense and disposed of free of charge in accordance with European
Directive 2002/96/EC and the German electrical law of 16/03/2005.
The costs associated with returning devices to ecom instruments
GmbH are to be borne by the sender.
In accordance with "Directive 2006/66/EC on batteries and accumu-
lators and waste batteries" we are obligated to provide you with the
following information:
Your device contains an alkaline battery.
Depleted batteries should never be disposed of along with normal or
household waste. Old batteries can contain harmful substances that
are hazardous to health and damaging to the environment.
16