Related Manuals for Garden Oasis D71 M12196
Summary of Contents for Garden Oasis D71 M12196
- Page 1 OWNER’S MANUAL EAST POINT 7PC DINING SET Product code: D71 M12196 UPC code: 769455 761996 Vendor Item: SS-I-139ES/6 Date of purchase: _____/ _____/ _____...
-
Page 2: Item Description
PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended. ITEM DESCRIPTION QUANTITY Swivel Frame Swivel Base Center Post Chair Frame Sling Seat And Back... -
Page 3: Swivel Assembly
ACCESSORIES Fa (12 + 1 spare) Fe (2) Short Bolt Allen Wrench Fb (12 + 1 spare) Ff (2) Long Bolt Hex Wrench Fc (36) Fg (1) Metal Washer Assembly Instructions Sheet Fd (12 + 1 spare) ASSEMBLY INSTRUCTIONS SWIVEL ASSEMBLY... - Page 4 Fb x 2 Long Bolt Fc x 4 Metal Washer Fd x 2 Do not tighten completely. Repeat procedure for the other side. Fa x 2 Bolt Fc x 2 Metal Washer Do not tighten completely. Repeat procedure for the other side. Securely tighten all bolts and nuts.
- Page 5 Push the center post (C) down firmly and twist it left and right as necessary. Repeat procedure for the other swivel.
-
Page 6: Chair Assembly
CHAIR ASSEMBLY Fb x 2 Long Bolt Fc x 4 Metal Washer Fd x 2 Do not tighten completely. Repeat procedure for the other side. - Page 7 Fa x 2 Bolt Fc x 2 Metal Washer Do not tighten completely. Repeat procedure for the other side. Securely tighten all bolts and nuts. Repeat procedure for the remaining 3 chairs. Your sling chairs and swivels are now ready for use. CARE INSTRUCTIONS Wash with a mild solution of soap and water;...
- Page 8 OWNER’S MANUAL EAST POINT 7PC DINING SET Product code: D71 M12196 UPC code: 769455 761996 Vendor Item: SS-I-139TEN Date of purchase: _____/ _____/ _____...
- Page 9 PARTS Read through all the instructions before beginning assembly. Unpack and identify all the parts. Place them on a flat, non-abrasive surface. Assembly by two people is recommended. ITEM DESCRIPTION QUANTITY Tempered Glass Tabletop With Rim Leg (3 Metal Washers and 3 Bolts attached for each leg) Metal Center Ring ACCESSORIES Da (1 spare)
- Page 10 ASSEMBLY INSTRUCTIONS Repeat procedure for the other three legs. Da x 4 Bolt (remove from the leg) Metal Washer x 4 (remove from the leg) Don’t tighten completely. Repeat procedure for the other three legs.
- Page 11 Da x 8 Long Bolt (remove from the leg) Metal Washer x 8 (remove from the leg) Don’t tighten completely. Repeat procedure for the other three legs. Db x 1 Umbrella Insert Piece Securely tighten all bolts diagonally. Your table is now ready for use. CARE INSTRUCTIONS Wash with a mild solution of soap and water;...