Table of Contents
Advertisement
TIMER – To use this function press TIMER and screen will turn on and blink for 10 seconds
before it will show the fix time setting. You can adjust it simply pressing down arrow and up
arrow. The timer can be adjusted from 1 minute to 12 hours. To cancel the time setting,
press TIMER again.
K/W – While cooking, press this symbol to check the electricity consumption and voltage.
The screen will show the data.
HOT – During and after cooking, if HOT indicator is still on it means the temperature is too
hot to be touched by hand. Once temperature cools down to safe degree, it will turn off
on its own.
Cleaning & Maintenance
Turn off the appliance by pressing ON/OFF and wait until the light turns off. Once
off, unplug the power cord properly.
Wait for some time and let the appliance cool down.
You can use mild detergent or dishwashing liquid with a soft cloth to remove dirt.
Do not clean it with running water or immerse it in water as water will get inside and
damage the appliance.
Always make sure that the top plate and the pan/pot is clean before cooking as
the dirt from the pan/pot will stick to the plate and plate will get discoloured.
You may clean the air vent by vacuum cleaner to suck up the dirt or you can use
cotton if the dirt is with oil. Toothbrush with little soap can also be used to clean the
surface as long as you use it gently on the appliance.
Do not use abrasives or strong detergents as it may get chemical reaction.
After dirt has been removed, use a dry, soft cloth to wipe dry the appliance.
Troubleshooting
Below are some common queries on the appliance. Please read and understand the basic
steps as it may save you time.
If your concern is not found on the list or your issue persists, then kindly call our service centre.
Problem
Infrared cooker is not
turning on
Possible causes
Circuit breaker has tripped.
The power cord is not plug
in.
The power cord is loosely
plugged into the wall
socket.
The power outlet does not
meet the required voltage
of the appliance.
Power overload.
Solutions
Make sure the voltage required by
the appliance is the same with
your home's voltage.
Make sure the wall socket you will
use to plug the appliance's power
cord does not have other power
cords plugged in.
The power must be tightly plugged
into the power outlet.
Advertisement
Table of Contents
