TABLE OF CONTENTS About this guide ................3 Purpose ........................3 Overview of this User’s Guide ................3 Introduction ................. 4 Features ..................4 Unpacking and Install ..............5 Unpacking ....................... 5 Before Installation ....................5 Identifying External Components ..........6 LED Indicators ................
About this guide Congratulations on your purchasing of the 16-Port 10/100Mbps fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Purpose This manual discusses how to install your 16-Port 10/100Mbps fast Ethernet Switch. Overview of this User’s Guide Introduction: A brief description of this Switch.
Introduction This chapter describes the Switch and some background information about Ethernet / Fast: The Switch was designed for easy installation and high performance in an environment where traffic on the network and the number of user increase continuously. The Switch with its small, compact size was specifically designed for small to middle workgroups.
Unpacking and Install This chapter provides unpacking and install information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: 16-port 10/100Mbps fast Ethernet Switch x 1 ...
Identifying External Components This section identifies all the major external components of the Switch. Both the front and rear panels are shown, followed by a description of each panel feature. The indicator panel is described in detail in the next chapter. Front panel:...
Page 7
the 16 ports. The LED indicators for PC connection dependent on the LAN card capabilities. If LED indicators are not light after making a proper connection, check the PC LAN card, the cable, the Switch conditions and connections. Hub to Switch A hub (10 or 100BASE-TX) can be connected to the Switch via a two-pair Category 3, 4, 5 UTP/STP cable.
Need help?
Do you have a question about the ZC-SW16 and is the answer not in the manual?
Questions and answers