Download Print this page

Burbuliukas PTV-KL User Manual

Water ionizers

Advertisement

Quick Links

www.aquacentrum.de/shop/ptv-al-topfionisierer-
aquaphaser/
T
e
xt
ENTERPRISE ÄBURBULIUKASÅ
WATER IONIZERS
PTV-KL, PTV-AL
PATENT No.2002102394
CE
TECHNICAL DESCRIPTION
AND
USER MANUAL
T
e
xt
T
e
xt

Advertisement

loading

Summary of Contents for Burbuliukas PTV-KL

  • Page 1 ENTERPRISE ÄBURBULIUKASÅ WATER IONIZERS PTV-KL, PTV-AL PATENT No.2002102394 TECHNICAL DESCRIPTION USER MANUAL...
  • Page 2: General References

    1. GENERAL REFERENCES 1.1. Terminology: 1.1.1. Water ionizer PTV Ä a device in which ionized or silvered water is produced during water electrolysis. 1.1.2. Ionized water Ä alkaline and acidic water is obtained at one time in separate containers of water electrolyzer.
  • Page 3: Design And Principle Of Operation

    4. DESIGN AND PRINCIPLE OF OPERATION 4.1. The device consists of a lower container (1), a removable vessel (3) and an enclosure (9). (See picture 4.2. The lower container (1) is an electrolysis container. In the upper part of it two handles are installed. (2) A removable semi round vessel is built in the container (3), in which parchment partition with two plate form plastic retainers are set instead of the front wall (4).
  • Page 4 4.6. When producing silvered water (modification KL), the removable vessel (3) is not necessary. The device control scheme does not allow to switch on the modes of production of ionized and silvered water at one time. 5. PROPERTIES OF IONIZED WATER AND ITS APPLICATION 5.1.
  • Page 5 6.5. Connect the string type cord with the plug (13) to the socket. Turn on the switch (20). On the enclosure (9) green indicator (14) lights up and in the indicator of timer (16) - letter PH shows. Set the working duration of the device according to the table 1.
  • Page 6: Safety Requirements

    Table 2 Work duration (sek.) Concentration of silver Work duration (min.) Concentration of silver water, mg/l water, mg/l 2 sek. 0,010 5 min. 1,671 5 sek. 0,027 10 min. 3,315 10 sek. 0,056 15 min. 5,022 15 sek. 0,082 20 min. 6,613 30 sek.
  • Page 7 10.POSSIBLE FAULTS AND WAYS OF THEIR REMOVAL Fault symptom Possible reason Remedy The device does not start, No power supply. Check power supply. indicators do not light, electrolysis does not take place Ionization is performed weakly: 1.Partitions are contaminated 1.Replace partitions with during the set time water of weaker 2.The light electrode is the new ones...

This manual is also suitable for:

Ptv-al