Kenwood DPX-5100BT Instruction Manual page 37

INSTALLATION/CONNECTION
Wiring connection
When connecting to an external amplifier, connect its ground wire to the car's chassis to
avoid damaging the unit.
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially available custom wiring harness
specific for your car and leave this job to professionals for your safety. Consult your car audio
dealer.
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
Ignition wire (Red)
Unit
Battery wire (Yellow)
ISO connectors
Pin Color and function (for ISO connectors)
A4 Yellow : Battery
Blue/White * 1
A5 : Power control
: Ignition (ACC)
A7 Red
: Earth (ground) connection
A8 Black
Purple ]
B1
: Rear speaker (right)
For 3-way crossover: Tweeter (right)
Purple/black [
B2
B3 Gray ]
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
B4 Gray/black [
White ]
B5
: Front speaker (left)
For 3-way crossover: Mid range speaker (left)
White/black [
B6
Green ]
B7
: Rear speaker (left)
For 3-way crossover: Tweeter (left)
B8 Green/black [
*
1
( 34)
33
ENGLISH