Download Print this page

T2 MS-34 Owner's Manual

Multiswitch

MULTISWITCH

OWNER'S MANUAL

MS-34

Table of Contents

Need help?

Do you have a question about the MS-34 and is the answer not in the manual?

Page 1 MULTISWITCH OWNER’S MANUAL MS-34...
Page 2 Features:: Thank you for purchasing this T2 multiswitch. T2 is the The MS-34 is a three input, four output multiswitch. It brainchild of some of the most experienced professionals is built to accept a signal from a dual LNB satellite dish, in the custom installation and home entertainment indus- plus a signal from either an off-air antenna or cable TV.
Page 3: Locking System
Locking System:: Mounting & Using the T2 Locking System:: Other Mounting Options:: Your multiswitch comes with the removable proprietary T2 To mount your multiswitch on a flat wall or surface, simply locking system attached, and is designed to be mounted in remove the hook and lock pieces by pulling outward.
Page 4: Connecting And Using
Installation Guidelines:: Connecting and Using:: DC Block:: Hooking up your MS-34 is easy. There are two levels of F-connectors. The three connectors on the upper level are A DC block has been included with your MS-34. The DC the inputs, and the four connectors on the lower level are block should be used when your system is utilizing a cable the outputs.
Page 5: Warranty
T2 Signal Management (T2) warrants this product to be free from defects in materials and workmanship for a period of three (3) years from the date of purchase or T2 will repair, or at its option, replace the defective product (with a new or factory reconditioned product, as T2 may determine).