Settings; General - Philips 9@9q Manual

x-saber_master_en.book Page 69 Wednesday, November 14, 2007 12:42 PM

15. Settings

You can configure your Xenium 9@9q mobile phone
to best suit your usage preference. You can configure
the following settings: General, Display,
Connectivity.
Press , to enter the main
Enter the menu
menu from idle mode and
select Settings.
Press < or >.
Select a settings menu
Press + or -.
Enter the menu options

General

This menu allows you to configure some general
settings:
Options Description
Active flip On or Off. You can change the
Select
current selection by pressing L.
When you select On, you can answer
an incoming call simply by opening
the flip.
Settings
Languages
Set the display language of the phone.
Time &
Display
•
date
When you select On, the time
information will be displayed in
idle screen.
Time
•
Sounds
clock menu and change the time
and
zone.
Set time: Set the time in the
•
format HH:MM.
Set date: Set the date.
•
Time
•
24 hours
as
Date
•
YYY/MM/DD,
DD.MM.YYYY,
DD-MM-YYYY.
Power-on
•
phone to be switched on. You can
select
On, you need to enter the time you
want your phone to be switched on.
Power-off
•
time: Select On or Off.
zone: Go to International
format: Set the time format
12 hours.
or
format: Set the date format as
YYYY.MM.DD,
YYYY-MM-DD
or
time: Set a time for the
On or Off. When you select
time: same as above.
69