Huawei ETS2526 User Manual page 74

13 Troubleshooting
Someone dials your terminal, prompt occurred like this "Sorry, the
calling is out of service, please call later", but dial a number from
your terminal is normal.
If the facsimile is not supported by network, this situation occurred because you
selected "On" from "FAX Mode". You need to tune off the PC facsimile function
if you want to receive an incoming call normally. The operation is shown as
follows:
1. Press <Menu> to enter function menu.
2. Press
3. Press <
4. Press <
5. Press <
off the PC facsimile function.
A caller ID is displayed on your terminal without ringing but dialing a
number from your terminal is normal. It does not work even you
press <CALL/REDIAL> key.
If the facsimile is supported by network, this situation occurred because you
selected "On" from "FAX Mode". You need to tune off the facsimile function if
you want to receive an incoming call normally. The operation is the same as the
question 5 in "13 Troubleshooting".
The screen sometimes displays no information and sometimes
displays a power supply indicator and a glittering battery indicator
after the FWT is turned off.
No information on the screen is a normal status of the FWT after power-off.
Displaying a power supply indicator and a glittering battery indicator indicates
that the FWT is charging the battery.
Hear ring tone after hearing busy tone.
Hearing ringing tone indicates that an external call is coming. If you are not in a
conversation state, you can answer the call. For specific operations of answering
a call, refer to the "Answering a Call".
Hear ringing tone when you are ready to dial or are dialing a number.
Hearing ringing tone indicates that an external call is coming. If you are not in a
conversation state, you can answer the call. For specific operations of answering
a call, refer to the "Answering a Call".
66
HUAWEI
or direction key to select "Settings".
/
> and select "Common".
/ > and select "Data Service".
/ > and select "FAX Mode" and than select "Off" to turn