This electronic user’s guide is intended • If turning off the monitor by detach- for anyone who uses the Philips display. ing the power cable or DC power Take time to read this user’s manual cord, wait for 6 seconds before before you use your display.
Page 4
1. Important brightness, avoid the fluorescent • Temperature: 0-40°C 32-104°F lighting, and surfaces that don’t • Humidity: 20-80% RH reflect too much light. Important information for Burn-in/ • Seeing a doctor if your symp- Ghost image toms. • Always activate a moving screen • Maintenance saver program when you leave • To protect your display from...
1. Important • Do not leave your display in a car/ 1.2 Notational Descriptions trunk under direct sun light. The following subsections describe Note notational conventions used in this Consult a service technician if the document. display does not operate normally, or you are not sure what procedure to take Notes, Cautions and Warnings when the operating instructions given in...
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs This marking on the product or on...
Contents: User’s Manual Monitor drivers 保留备用 VESA mount area until the latch www.philips.com/welcome Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. locks the neck. * CD...
Page 8
2. Setting up the monitor Connecting to your PC its power cable. 3. Connect the display signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your display into a nearby outlet.
What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD displays. It allows an end user to adjust screen performance or select functions of the displays directly through an on-screen instruction window.
2. Setting up the monitor The OSD Menu Resolution notification Below is an overall view of the structure This display is designed for optimal of the On-Screen Display. You can use performance at its native resolution, this as a reference when you want to 2560 x 1440 @ 60 Hz.
2. Setting up the monitor Pivot 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the display base, please follow the instructions below to avoid any possible damage or injury. 1. Place the display face down on a smooth surface.
Game, Economy, LowBlue Mode, brightness, contrast, color and sharpness SmartUniformity and Off. in real time. Whether you're working with text applications, displaying images SmartImage or watching a video, Philips SmartImage delivers great optimized display EasyRead performance. Office Why do I need it? Photo...
By reducing your display's power time. Developed for wellbeing, consumption, you save on energy costs Philips LowBlue Mode setting uses a and extend the lifetime of your display. smart software technology to reduce harmful shortwave blue light.
4. HDR 4. HDR It is compatible with input signals in HDR10 format. The display may automatically activate the HDR function if the player and content are compatible. Please contact the device manufacturer and the content provider for information on the compatibility of your device and content.
5. Technical Specifications 5. Technical Specifications Picture/Display Display Panel Type IPS technology Backlight W-LED system Panel Size 31.5" W (80.1 cm) Aspect Ratio 16:9 Pixel Pitch 0.2727 x 0.2727 mm SmartContrast 50,000,000:1 Response Time 8ms (GtG) SmartResponse 4ms (GtG) VGA: 1920 x 1080 @ 60Hz Optimum Resolution HDMI/DisplayPort/USB type-C: 2560 x 1440 @ 60Hz Viewing Angle...
Page 16
5. Technical Specifications Plug & Play Compatibility DDC/CI, Mac OS X, sRGB, Windows 10/8.1/8/7 Stand Tilt -5 / +20 degree Swivel -170 / +170 degree Height adjustment 180mm Pivot 90 degree Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz...
Page 17
Finish Texture Note EPEAT Gold or Silver is valid only where Philips registers the product. Please visit www. epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
6. Power Management 6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 21
Black Dot Defects the warranty period, a TFT Display panel Black dot defects appear as pixels or in a Philips flat panel display must have sub pixels that are always dark or 'off'. pixel or sub pixel defects exceeding the That is, a dark dot is a sub-pixel that tolerances listed in the following tables.
Page 22
7. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >10mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the display from mains • First, ensure that the power button power source immediately for safety on the front of the display is in the • Contact with Philips customer OFF position, then press it to the service representative immediately. ON position.
For further assistance, refer to the images over an extended period Consumer Information Centers list may cause "burn in", also known as and contact Philips customer service "after-imaging " or "ghost imaging", representative. on your screen. "Burn-in", "after- imaging", or "ghost imaging" is a 8.2 General FAQs...
Page 26
• Shut down your computer, the panel surface side. This may disconnect your old display and affect your warranty conditions. reconnect your Philips LCD display. • Turn on your display and then turn How should I clean the LCD on your PC.
Page 27
Can I connect my LCD display to repaired. The damage mentioned above any PC, workstation or Mac? is not covered under your warranty. Ans.: Yes. All Philips LCD displays are Q12: Why is my Display not showing fully compatible with standard sharp text, and is displaying PCs, Macs and workstations.
Need help?
Do you have a question about the Brilliance 328P6AUBREB/11 and is the answer not in the manual?
Questions and answers