Matchless Leanline III TC User Instructions page 4

LEANLINE III TC
SECTION TH
Place a row of 5 'B' ~oals as
these coals are supported by the front coal and the rear
edges rest on top of the rear matrix.
Note: These coals ~ust be position on top of the rear
not into fhe valleys and no coals should be
matrix and
placed on top of the burner.
c~.1
• Place five (3 'A' and 2 'B') coals as shown. Ensure
that the 'B'
which has an a1gle of approximately
into the corner
of the appliance up against the rear
and side of the appliance. The
coals
should be position
appliance and rebt on top of the rear matrix.
r
• Place four (2 'A'
matrix as Shown
1
,1,
• Place three (2
matrix as shownT
• Place the 2 remalning 'A' coals as shown.
III TC Lo
&
shown. Ensure the fronts of
lJ31·16
is positioned so that the corner,
90
short side of the
against the rear
and 2 'B') coals on top of the rear
and 1 'B') coals on top of the rear
1~3150
Users Instructions
Fig.5x
0
located
is
,
'A'
of the
Fig.6x
58201