Advertisement
Quick Links
Version 0.2
FEATURES AND SPECIFICATIONS
LEDS: 12, 25W each (RGBWA, 5in1)
Beam angle: 60ᵒ
Control system: DMX512 + Stand Alone Modes
DMX channels: 5/9
DMX connectors: 3 pin XLR I/O
Refresh Rate: >3000 Hz)
Voltage: 100 - 240 VAC 50/60Hz
Max power consumption: 330 Watts
Cooling: Internal Fan
Body material: Sheet steel
Body color: Black
Size: 39.4"L x 5"W x 3.4"H
DESCRIPTION
The FXLD2512B516 is a RGBWA LED lighting fixture. It
is suitable for stage, disco, night club, and other artistic
applications. It has several stand-alone control modes and
can operate via a DMX512 external signal.
INSTALLATION
LOCATION
The FXLD2512B516 is rated IP20 and is intended for
INDOOR USE ONLY.
Locate the unit in a well ventilated area away from moisture
and heat. Keep the vent holes clear. Holes are provided on
the brackets to install a lighting bar pipe clamp. Use a safety
cable when hanging the fixture.
POWER CONNECTIONS
RISK OF ELECTRIC SHOCK
The FXLD2512B516 has a blue turn and lock connector for
power input. A compatible power cable is provided for
connection to a 120 VAC, 15 Amp, 60Hz, grounded service.
Push the blue connector on the cable straight into the blue
connector on the unit and twist approx. 1/8 turn clockwise to
latch it. The white turn and lock connector on the unit is
used to pass power on to another FXLD2512B516 unit. A
mating white connector is also provided.
Caution is advised since the line cord is rated for approx. 7
Amps maximum.
www.lightronics.com
Lightronics Inc.
FXLD2512B516 LED FIXTURE
OWNERS MANUAL
CAUTION
509 Central Drive Virginia Beach, VA 23454
THE SAFETY GROUND TERMINAL ON THE POWER
CABLE MUST BE USED.
DMX CONNECTIONS
A system using DMX control must be connected as a chain
of devices. In other words the control signal cable should
proceed from the controller to the first receiving device and
then to others in a continuous "daisy chain" fashion.
The fixture has a DMX IN and a DMX OUT connector to be
used to connect the chain. The control cable should NOT be
split into a multiple run star arrangement with a cable
running from the controller directly to each receiving device
pack.
DMX CONNECTOR PIN ASSIGNMENTS
There are two different connectors which can be used for
DMX control. They are both XLR type connectors.
This unit uses 3 pin XLR type connectors. The
FXLD2512B516 receives a DMX signal on the 3 pin MALE
connector on one side of the unit.
3 Pin Pinout
PIN #
SIGNAL NAME
1
DMX COMMON
2
DMX DATA -
3
DMX DATA +
DMX TERMINATION
A DMX chain should be terminated at the last receiving
device on the chain. This is done by installing a commonly
available 1/4 Watt, 120 Ohm resistor across the DATA - and
DATA + wires at the last device. If you have only a few
fixtures very close together and a very short run to the
controller then you may be able to operate without the
terminator.
Page 1 of 6
09/14/17
757 486 3588
Advertisement
Summary of Contents for Lightonics FXLD2512B516
- Page 1 This unit uses 3 pin XLR type connectors. The INDOOR USE ONLY. FXLD2512B516 receives a DMX signal on the 3 pin MALE connector on one side of the unit. Locate the unit in a well ventilated area away from moisture and heat.
-
Page 2: Operation
Color Fade, Color Change, Color Select, Manual Level (5 selections), Demo, Sound, delo. DMX OPERATION For DMX operation the FXLD2512B516 fixture can be configured as a 5 channel or 9 channel unit. Use the dXXX (5 ch) or AXXX (9 ch) menu to set the starting address of the unit. -
Page 3: Troubleshooting
The fixture contains a 2 Amp 250VAC, fast acting, 5mm x 20mm externally accessible fuse. Replace the fuse ONLY with the same size and type. The FXLD2512B516 does not contain any other user serviceable parts. Internal service on the unit by other than Lightronics authorized agents will void the warranty. -
Page 4: Menu Navigation
Page 4 of 6 FXLD2512B516 LED FIXTURE Version 0.2 OWNERS MANUAL 09/14/17 MENU NAVIGATION www.lightronics.com Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 757 486 3588... -
Page 5: Dmx Values And Functions
Page 5 of 6 FXLD2512B516 LED FIXTURE Version 0.2 OWNERS MANUAL 09/14/17 DMX VALUES AND FUNCTIONS 5 CHANNEL MODE (MODE dXXX) CHANNEL NO. FUNCTION 0 - 255 Red Level 0 - 255 Green Level 0 - 255 Blue Level 0 - 255 White Level... -
Page 6: Warranty
WARRANTY This product is warranted for a period of TWO YEARS from the date of purchase against defects in materials and workmanship. This warranty is subject to the following restrictions and conditions: A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer.