Table of Contents
Advertisement
Quick Links
Introduction
Congratulations and thank you for purchasing W Box
Technologies 0E-HDMISP1X4.
0E-HDMISP1X4 is a 1 to 4 splitter for HDMI with 4K@60Hz 4:4:4
8bit which reliably distributes one HDMI input to four HDMI
outputs. It also provides high-tech MIX EDID management and
HDCP management which authenticates HDCP encryption
between all devices, ensuring the HDMI source reliably outputs
correct content for display.
0E-HDMISP1X4 is ideal for applications, such as offices, schools,
conferences rooms, shopping malls, hotels or museums, which
require the distribution of an HDMI source signal to four outputs.
Please follow the instructions in this manual to assure proper
installation and to achieve the full performance and satisfaction
you would expect from W Box Technologies.
! 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for W Box Technologies 0E-HDMISP1X4
Summary of Contents for W Box Technologies 0E-HDMISP1X4
- Page 1 Congratulations and thank you for purchasing W Box Technologies 0E-HDMISP1X4. 0E-HDMISP1X4 is a 1 to 4 splitter for HDMI with 4K@60Hz 4:4:4 8bit which reliably distributes one HDMI input to four HDMI outputs. It also provides high-tech MIX EDID management and...
-
Page 2: Package Contents
Reshapes marginal or noisy HDMI signals, ensuring a strong, stable digital signal Package Contents Before you start the installation, please check the package contents: 1 x 0E-HDMISP1X4 • • 1 x Power Adapter (DC 12V 1A) • 1 x Phoenix male connector (3pin 3.5mm) •... - Page 3 Panel Front Panel ID. Name Description Steady blue: When a source device is powered on and connected to the splitter. HDMI IN LED OFF: No source device is connected or it is powered off. Steady blue: The HDMI displays is powered on and connected to HDMI OUT corresponding output.
- Page 4 Rear Panel ID. Name Description Connects to DC 12 V 1 A power DC 12V Port adapter. Connects to HDMI display using HDMI OUT1 Port HDMI cable. Connects to HDMI display using HDMI OUT2 Port HDMI cable. Connects to an HDMI source using HDMI IN Port HDMI cable.
-
Page 5: Installation
Installation 1. Connect an HDMI source device (such as a Blu-ray player) to the splitter HDMI IN port. As show number 1 in figure. 2. Connect 4 HDMI displays (such as HD monitors) to the splitter HDMI OUT ports. As show number 2,3,4,5 in figure. 3. -
Page 6: Edid Management
0E-HDMISP1X4 supports MIX EDID, Fixed EDID and copy EDID functions, there is a EDID rotary switch on the panel, when connect multiple monitors at the same time, the device will contrast the EDID of all the displays and output the property timing depend on toggle the switch. - Page 7 Position Description Function 1920x1080@60Hz_3 Fix it as native. D_2CH with HDR 1920x1080@60Hz_3 Fix it as native. D_5.1CH with HDR 1920x1080@60Hz_3 Fix it as native. D_7.1CH with HDR Copy EDID from output1 Reserved Reserved Reserved Reserved Reserved Note: If EDID copy failed, output EDID: 1080P@60Hz with stereo audio.
-
Page 8: Troubleshooting
Troubleshooting W Box Technologies products are designed to function trouble- free. Most problems that occur are due to simple issues. If you have trouble, please check the list of simple fixes below. Six Steps of Regular Troubleshooting Routine. 1. Power: Make sure all devices are powered on. (source, splitter, display devices) 2. -
Page 9: Specification
Specification Technical Input/Output Signal Type HDMI with HDCP 2.2 SMPTE: 1280x720P 1,2,3,4,5,6,7,8 , 1920x1080I 1920x1080P 1,2,3,4,5,6,7,8 , ; 3840x2160 2,3,5,6,8 , 4096x2160 2,3,5,6,8 VESA: 800x600 , 1024x768 , 1280x768 Input/Output Resolution 1280x800 , 1280x960 , 1280x1024 1360x768 , 1366x768 , 1400x1050... -
Page 10: Limited Warranty
Subject to the terms and conditions of this Limited Warranty, from the date of sale through the period of time for product categories specified in Section 1(b), ADI warrants its W Box Technologies products to be free from defects in materials and workmanship under normal use and service, normal wear and tear excepted. - Page 11 Buyer those warranties and only those warranties extended by such third party manufacturers or vendors for non-ADI branded products. ADI does not itself warrant any non-ADI branded product and sells only on an as is basis in accordance with ADI’s terms and conditions of sale.
- Page 12 Product Categories Warranty Period Power and Relays 30 months Hold-up Buttons 30 months Video Baluns 30 months DVR's, NVR's 60 months IP Cameras 60 months Racks 60 months TV Mounts 60 months PIR’s 60 months Analog Cables Limited Lifetime B Connectors Limited Lifetime Bus Terminals Limited Lifetime...
- Page 13 OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF THIS OR ANY OTHER...
- Page 14 liquidated damages and not as a penalty and shall be the complete and exclusive remedy against ADI. ! 1 4...
- Page 15 3. Limitation on Liability to Buyer’s Customers. Buyer agrees to limit liability to its customers to the fullest extent permitted by law. Buyer acknowledges that ADI shall only be deemed to give consumers of its products such statutory warranties as may be required by law and at no time shall Buyer represent to its customers and/or users of ADI products that ADI provides any additional warranties.
- Page 16 ADI reserves the right to issue a credit only in lieu of replacement. If any W Box Technologies product is found to be in good working order or such product’s inability to function properly is a result of...
Need help?
Do you have a question about the 0E-HDMISP1X4 and is the answer not in the manual?
Questions and answers