Onboard Leds - Asus ROG STRIX Z370-E GAMING User Manual

1.1.7

Onboard LEDs

1. POST State LEDs
The POST State LEDs provide the status of these key components during POST
(Power-On Self-Test): CPU, memory modules, VGA card, and hard disk drives. If an
error is found, the critical component's LED stays lit up until the problem is solved.
®
STRIX Z370-E GAMING
ROG STRIX Z370-E GAMING
CPU/DRAM/BOOT_DEVICE/VGA LED
2. Standby Power LED
The motherboard comes with a standby power LED. The LED lights up to indicate that
the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
®
STRIX Z370-E GAMING
ROG STRIX Z370-E GAMING PWR_LED
ASUS ROG STRIX Z370-E GAMING
BOOT (YELLOW GREEN)
VGA (WHITE)
DRAM (YELLOW)
CPU (RED)
PWR_LED
1-11