Page 1
Water Dispenser with Ice Maker BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. Avanti Products P.O.
Child Safety Guard on the Hot Water Faucet Cold Water Operation Ice-Maker Operation Care and Maintenance Taking the Dispenser Out of Service Troubleshooting Guide Service for Your Water Dispenser Wiring Diagram Your Avanti Products Warranty Registration Information and Registration Card Table of Contents...
Keep it handy to answer your questions. If you don't understand something or you need more assistance please call: Avanti Customer Service 800-220-5570 Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
Control Panel Hot Water Faucet with Child Safety Lock Room Temperature Faucet Cold Water Faucet Water Drip Tray Ice Maker Compartment Water Inlet Power Indicator Light (Green) Hot Water Indicator Light (Red) Cold Water Indicator Light (Blue) Ice Maker Indicator Light (Blue) PARTS AND FEATURES Ice Maker –...
Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER. Before Using Your Water Dispenser • Check to be sure the following parts are included: ...
When a new bottle is installed you must open the hot water faucet and remove no less than 4 full cups of water to insure the water flows properly and the water reservoir is at the proper level. OPERATING YOUR WATER DISPENSER Control and Display Panel Power Indicator Light (Green)
Hot Water Operation • Press the hot water button (see figure above). • The RED hot water indicator above the button will start blinking, this means the heating element has started to work. • When the RED indicator light reached a solid glow it means the hot water has reached the desired temperature.
Cold Water Operation • Press the cold water button (see figure above) to turn ON the cooling cycle. • When the cooling system is ON, the BLUE cold water indicator light above the button (see figure above) will start blinking which indicates the cooling cycle is operating •...
Ice Maker Operation • Press the ice-maker button (see figure above) to begin the ice-making cycle. • When the cooling system is on, the BLUE ice indicator light above the button (see figure above) will start blinking which indicated the ice-making cycle is operating. •...
Vacuum accumulation of dust or clean it with a hard brush. TAKING DISPENSER OUT OF SERVICE • If the water dispenser will not be used for a long period of time, unplug the power cord from the wall outlet. •...
Avanti appliances. With the purchase of your Avanti appliance, you can be confident that if you ever need additional information or assistance, the Avanti Products Customer Service Team will be here for you. Just call us toll-free.
Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days.
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days Protect your product: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
Need help?
Do you have a question about the WID260P and is the answer not in the manual?
Questions and answers