Table of Contents
Advertisement
Quick Links
About JMD Assistant
JMD Assistant is an OBD model to help HandyBaby to read out data from
Volkswagen cars, and it needs your HandyBaby upgrade to at least version 8.0.0.
JMD Assistant reads data from Volkswagen cars only and won't write any data to
cars, even in all key lost , so it won't be locked when the car connect to the server
in 4S. HandyBaby reads data from JMD Assistant with RF, and it no needs any
cables or computer during your work.
New key clone (The case have a original key)
Step 1 :
Step 2 :
Insert the original key turn on
Insert JMD Assistant to OBD port
1
1
2
* If dashboard happen spangled or re-light (don't worry that phenomenon is ok)
*Finish could listen beeper short "BiBiBi" by OBD that's was OK could next
step
*Finish could listen beeper long "Biiiiiii" by OBD
that's can't clone so far.
(upgrade continue)
Advertisement
Table of Contents
Summary of Contents for JMD Assistant
- Page 1 , so it won’t be locked when the car connect to the server in 4S. HandyBaby reads data from JMD Assistant with RF, and it no needs any cables or computer during your work.
- Page 2 Step 3: Step 4: Handy Baby and choice” More-fun” VOLKSWAGEN Step 5: Step 6: Push OK ” OK TO READ” Assistant read Step 7: Step 8: Read Success by OBD data Insert original key push OK...
- Page 3 Step 11: Step 12: Copy more? New JMD48 chip push OK New key clone (The case all key lost): Tham same above Step1 to Step5 ….. continue Step6 Step 6: Step 7: Assistant read push OK Copy by JMD48 chip...
- Page 4 If fail in reading, make sure you have follow the steps above and check the car is supported(see the list), or contact us How could update new version JMD Assistant connect to computer with USB cable, and open JMD Client software, click “UPDATES” –“JMD Assistant update”, then wait it until finish update.
- Page 5 Anti-virus and defender during update. Information about JMD Assitant JMD Assistant HandyBaby’s coil , and get into” basic-info” menu, wait several seconds and press OK to read, it will show information of JMD Assistant.
- Page 6 Charge Please charge with 5V/1A，you can charge with computer or with power supply unit of smart phone. During charge , LED shows read, and shows blue in full charging. Support list (Clone only) More cars will be add in the future version, please put eyes on the latest news. Note: some cars are not support in the next half year of 2015 in the list, and blade shape remote key are not support too.
- Page 7 Q：The dashboard off and can not light up again. A： For the wrong operations and other reasons, the dashboard can’t light up again, please pull out JMD Assistant and insert key and twist to II again, or cut off the battery and link back again.
- Page 8 Q：There is a wrong sound from JMD Assistant after reading A：Check the car if support or not, and make sure your JMD Assistant in the latest version, if so, try again. For fail again, contact us and send us the codes, car model, years.