Advertisement
Quick Links
TM
&
FitTrack Software
Quick Start Guide
This reference may be used as a quick resource
when operating the Quantifit
Occupational Health Dynamics
197 Cahaba Valley Pkwy, Pelham, Alabama 35124
(205) 980-0180 (888) 464-3872 Fax: (205) 980-5764 www.OHDUSA.com
You may obtain additional copies of this Quick Start Guide from our website
Advertisement
Summary of Contents for Occupational Health Dynamics QUANTIFIT
-
Page 1: Quick Start Guide
& FitTrack Software Quick Start Guide This reference may be used as a quick resource when operating the Quantifit Occupational Health Dynamics 197 Cahaba Valley Pkwy, Pelham, Alabama 35124 (205) 980-0180 (888) 464-3872 Fax: (205) 980-5764 www.OHDUSA.com You may obtain additional copies of this Quick Start Guide from our website... - Page 2 1. Step One: Zero Pressure You will be prompted to confirm that the triple-tube assembly has been removed from the Quantifit. • Hit <Enter> on the keyboard or press on the Optical Sensor Knob to continue.
- Page 3 8. At the end of 8 seconds, the test is completed and the breathing passage is automatically opened. The test subject can then release the trigger button. 9. If the test step passed, the Quantifit will display the fit factor and leak rate for 3 seconds before moving forward to the next step.
- Page 4 “Auto Save” buttons at the bottom of the screen. Auto Save is the recommended configuration when usng the Quantifit. (Fig. 6) 28. Read instructions at each step of the test (Fig. 7) 29. For each step, the test subject will hold a comfortable breath and remain motionless for the duration of the test.