Page 1
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without notice. La sección en español empieza en la página 14...
Taking the dispenser out of service Problems with Your Water Dispenser Troubleshooting Guide Service for Your Water Dispenser Wiring Diagram Your Avanti Products Warranty Instrucciones en Español Registration Information and Registration Card TABLE OF CONTENTS 7 – 8 14 – 17...
Keep it handy to answer your questions. If you don't understand something or you need more help, please call: Avanti Customer Service 800-220-5570 Keep proof of original purchase date (such as your sales slip) with this guide to establish the warranty period.
PARTS AND FEATURES WATER INTAKE HOT WATER LIGHT (RED) POWER INDICATOR (YELLOW) COLD INDICATOR LIGHT (GREEN) HOT WATER FAUCET (PINK) COLD WATER FAUCET (GREY) REMOVABLE DRIP TRAY ADJUSTABLE FOOT COOLING SWITCH 10. HEATING SWITCH 11. CONDENSER COIL 12. POWER SUPPLY CORD 13.
Plug the appliance into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and or grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
Height Adjustment Platform To make the water dispenser faucets more accessible your unit has been supplied with a height adjustment platform. The platform requires assembly as shown below. Parts Provided: 1 Front Panel 1 Back Panel 1 Stability Ring (located on the top foam cover) 2 Short Screws and 2 Long Self-tapping Screws (located in the bag with instruction manual) Remove all parts from the box and remove the packing materials.
Page 8
Fig 2b and Fig 2c. (insert figure 2c.) e) Place the water dispenser on the assembled platform and firmly secure the water dispenser and platform together using the screws provided (2 long self-tapping). Be sure the power cord fits securely over the cutout in the back panel.
HOT switch to the “OFF” position. IMPROPER USE OF THE GROUNDED PLUG CAN RESULT IN THE RISK OF ELECTRICAL SHOCK. IF THE POWER CORD IS DAMAGED, HAVE IT REPLACED BY AN AUTHORIZED AVANTI PRODUCTS SERVICE CENTER.
OPERATING YOUR WATER DISPENSER Steps to replace water bottles • Use a clean cloth to wipe off neck of bottle. • Remove cap. • Carefully lift bottle (approx. 40 lbs.) using your legs and not your back. Do not place hands on opening of bottle while placing in reservoir.
Vacuum accumulation of dust or clean it with a hard brush. TAKING DISPENSER OUT OF SERVICE • If the water dispenser will not be used for a long period of time, unplug the power cord from the wall outlet. •...
We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can have the confidence that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you.
Avanti Products will provide you with a reasonably similar product that is either new or factory refurbished. In rental or commercial use, the warranty period is 90 days.
INSTRUCCIONES EN ESPAÑOL PLATAFORMA PARA AJUSTE DE ALTURA PARA PERMITIR QUE EL GRIFO DE SU DISPENSADOR DE AGUA SEA MAS ACCESIBLE, SU UNIDAD CUENTA CON UNA PLATAFORMA PARA AJUSTE DE ALTURA. LA PLATAFORMA REQUIERE ENSAMBLAJE TAL COMO SE ENSEÑA ABAJO. RETIRE TODAS LAS PARTES Y LOS MATERIALES DE EMPAQUE DE LA CAJA.
Page 15
G) ASEGURESE QUE AMBOS CLIPS EN LOS LADOS DE LA PLATAFORMA Y LOS ORIFICIOS PARA LOS TORNILLOS SE ALINEEN CORRECTAMENTE ANTES DE INSERTAR LOS CLIPS EN SU LUGAR RESPECTIVO DEL ARO DE ESTABILIDAD COMO SE MUESTRA EN LA FIG 2B. ORIFICIO PARA EL CLIP...
PASOS RECOMENDADOS PARA CAMBIAR EL BOTELLON QUITE EL BOTELLON VACIO. LIMPIE EL CUELLO DEL BOTELLON NUEVO CON UN TRAPO LIMPIO. LEVANTE EL BOTELLON HACIENDO FUERZA CON LAS PIERNAS Y NO LA ESPALDA. TOME EL BOTELLON POR LOS LADOS Y DIRIJA EL CUELLO DEL MISMO HACIA LA ...
Page 17
A INTERVALOS REGULARES (UNA VEZ AL MES), INSPECCIONE EL CONDENSADOR O REJILLA DE ALAMBRE LOCALIZADA EN LA PARTE TRASERA DE LA UNIDAD. ANTES DE EFECTUAR LA LIMPIEZA, DESENCHUFE EL ENFRIADOR. USE UNA ASPIRADORA O UN CEPILLO DURO PARA QUITAR EL POLVO. PARA LIMPIAR LAS PARTES DE PLASTICO SE REQUIERE JABON LIQUIDO Y AGUA TIBIA.
Registration Information Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of purchase and receive these important benefits: Protect your product: We will keep the model number and date of purchase of your new Avanti product on file to help you refer to this information in the event of an insurance claim such as fire or theft.
Need help?
Do you have a question about the WD362BP and is the answer not in the manual?
Questions and answers