Programming The Asus Dl101 - Asus DL101 User Manual

Programming the ASUS DL101

The ASUS DL101 can register one (1) master password and
nine (9) passwords (user password, one time password (OTP),
and user card). You can also configure the settings of the
DL101 to suit your needs.
NOTE: When the ASUS DL101 is unlocked, touch
the panel, then press <OK> to enter programming
mode.
Setting a new master password
Enter old master
password
(default: 0000)
then press <OK>
NOTE: The master password is for programming the
ASUS DL101 only and cannot be used to unlock.
Setting a new user password
Enter master
password
(default: 0000)
then press <OK>
Press <1> then
press <OK>
Press <2> then
press <OK>
Enter new master
password (four
to eight digits)
then press <OK>
Enter a new user
password (four
to ten digits)
then press <OK>
Panel will
repeat the
user password
sequentially
23