Related Manuals for Brilix BARACUDA
Summary of Contents for Brilix BARACUDA
- Page 1 AUTOMATIC BARACUDA VACUUM POOL CLEANER INSTALLATION USER GUIDE Please, carefully read the instruction...
- Page 2 1. Mounting Take the body of vacuum pool cleaner and its components out of the box and make sure that the packaging includes all components needed. See picture no.1 Picture 1 List of components: 1. Body of vacuum pool cleaner 2.
- Page 3 Step 1. Connect the defl ector Picture 3 Insert the bottom end of the segment into the groove on the body of the vacuum pool cleaner Insert the top end of the segment into the detaining clip adjusted to the nosepiece.
-
Page 4: Standard Installation
Wet slightly both ends in the pool and stick them together by Picture 5 turning. See picture 5. Repeat the process until you put together the amount of components required. When you stick the weight Ending „socket” Ending „plug” into the hose, according the instruction in the Table A, connect the hose to the vacuum pool cleaner. - Page 5 1. Turn the pool pump off. Picture 8 Top part of the skimmer 2. Close the main plug and all other tap-hole pipes except the pipe from skimmer to which the vacuum pool cleaner will be fi tted. 3. Pull the skimmer basket off. The hose led Connect through...
- Page 6 Check if the immersion mechanism moves loosely and if the immersed controller is installed. (See the page 2 – how to install the immersion controller.) Shorten the defl ector by 1,27 cm (Pull up the top end of the defl ector from the detent clamp conncected to the nosepiece.
-
Page 7: Removing The Current Defects
Picture 10 Walk around the pool Ball rectifi er Connector Wall of the pool holder Ball Return pipes rectifi er Security ring Locations of the ball rectifi er Direct the opening of the rectifi er to the diversion of the water fl ow in the place where it won‘t restrain the vacuum pool cleaner operations. - Page 8 Make sure there isn’t any dirt in the safety valve of the vacuum pool cleaner. It should restrain the operation or the fl ow. The pump and the fi ltration system of the pool might be too small (not able to ensure the fl ow of 4,5m /h) Consult the expert in pools.
- Page 9 If the vacuum pool cleaner always comes back in the same place Check the swivel joint placed on the top part of the vacuum pool cleaner. It should revolve freely. Check the backwater and divert it as necessary by the ball rectifi er. Check if the hose is not bent nor broken.
-
Page 10: Maintenance
Maintenance The vacuum pool cleaner does not require almost any maintenance. Look over it time to time and make sure that: The safety valve moves freely and there is no dirt preventing this move. The disc is not too worn. If the disc is used after moving at the bottom of the pool, this is the right time to change it. - Page 11 List of components: S250B S250Q S250M S250C S250G S250W S250L S250A S250N S250T S250F S250K S250H S250R S250...
- Page 12 Conditions of guarantee Conditions of guarantee abide by the trading and guarantee conditions of your supplier. Secure disposal of the product after the lifetime expiry After the lifetime expiry, ensure its ecologic disposal by a skilled company Complaints and customer service Complaints abide appropriate consumer protection rights.
Need help?
Do you have a question about the BARACUDA and is the answer not in the manual?
Questions and answers