Page 9
Co.adjust = Calibration Hold the Cross pressed until it moves and repeat until finished.
Page 10
Additional settings „Update Logo“ enables you to choose your own boot up logo. Required file format : 24bit/Bmp with 800x480 resolution and filename „LOGO“.
Page 11
„GPS Path“ enables you to set the path to the navigation software which will be started when you press the „car“-icon in main menu.
Page 14
With „USB“ you can change connection mode to PC. Activesync = Configuration with Windows mobile program...
Page 16
For connection to your radio, you need to select a frequency which is not used in your region. Note that PND must be connected to power to enable FM transmitter mode.
Page 18
Windows CE Modus With icon „Windows“ you can start the device in WinCE mode.
Page 19
To end this mode just double click „GPS“ icon.
Page 22
Also enable BT on your cell phone. The PND is called either „AtlasVI BT“ or „APKBTDEV“. Now couple the devices. PIN is 8888.
Page 24
Now your cell phone is paired with the PND.
Page 25
Accessoiry Setup with TMC and wireless camera : Connect GNS FM9 TMC receiver to CTFPND-1 V4. Please note that the PND has to be connected to power. When you want to use TMC and wireless camera, then first connect the wireless video receiver to the...