Main Parts Of Concrete Cutter - North Star 49157 Owner's Manual


Do not insert hands or fingers between pulley cover and engine during operation, this will cause
injury.

Do not transport the Concrete Cutter with fuel in its fuel tank by the motor vehicle.

Do not lift the Concrete Cutter by a person when putting on and off from vehicle. Always use a
proper lifting crane to move. Lifting by person may cause personal injury due to its heavy weight.

Make sure to securely fasten the Concrete Cutter for transportation. Improper fastening as
holding the handle of the cutter during the transportation may cause an injury.

Also refer to the enclosed engine manual if there is a problem or a question on engine. Safety
Labels
01 Height Adjust Handle
02 Handle Stopper
03 Elevator Screw Stopper
04 Water Tank
05 Water Valve
06 Lift Handle
07 Water Tank Cap
08 Frame
09 Engine Fuel tank Cap
10 Handle
11 Handle Grip
12 Engine Stop Switch

Main Parts of Concrete Cutter

Page 8 of 30
14 Engine Base Plate
15 Engine Muffler
16 Belt Cover
17 Guide Wheel
18 Front Wheel
19 Blade Cover
20 Blade Holder
21 Rear Wheel
22 Gauge Pin
23 Engine Recoil Starter
24 Wrench (32/36mm)
25 Throttle lever