Product Dimensions And Clearances; Tools Required; Parts Supplied - GEAppliances Universal II Installation Instructions Manual

PRODUCT DIMENSIONS AND CLEARANCES

24" 15"
(61 cm) (38.1
min. cm) min.
Locate the outlet 18" (45.7 cm) min. from
the floor, 3" (7.6 cm) min. from either side
TOOLS
REQUIRED
• Level
• Phillips screwdriver
• Pliers
All parts are located in a package inside the drawer.
To order additional parts, call 800.626.2002 or visit
GEAppliances.com in the United States. In Canada,
call 1.800.561.3344 or visit www.GEAppliances.ca.
Design Information
34" (86.4 cm)
to
35" (88.9 cm)
23" (58.4 cm)
• Gloves
• Measuring tape
33-3/4"
(85.7 cm)
min.
to
35"
(88.9 cm)
max.
14-7/8" (37.8 cm)

PARTS SUPPLIED

• 6 mounting screws,
#8 x 11/16" (1.8 cm)
long
• 2 side-mounting clips
2
clearance at the
front for a full drawer
opening.
clearance on the right
side to the nearest
vertical wall or cabinet
for bag removal.
• Note: This compactor
is designed for built-in
applications only.
• 2 countertop retaining
brackets