UTEK UT-6516U User Manual

10/100m unmanaged ethernet switch

Advertisement

Quick Links

UT-6516U & UT-6524
10/100M Unmanaged Ethernet Switch

User Manual

May 8, 2013
Version: V1.0
UTEK TECHNOLOGY (SHENZHEN) CO., Ltd
http://www.szutek.cn

Advertisement

Table of Contents
loading

Summary of Contents for UTEK UT-6516U

  • Page 1: User Manual

    UT-6516U & UT-6524 10/100M Unmanaged Ethernet Switch User Manual May 8, 2013 Version: V1.0 UTEK TECHNOLOGY (SHENZHEN) CO., Ltd http://www.szutek.cn...
  • Page 2 All rights reserved Any or all portion of this Manual, without prior written permission from Shenzhen UTEK Technology Co., Ltd., shall neither be imitated, copied, transcribed, or translated by organizations or individuals, nor used in any form or manner (electronic, mechanical, photocopying, recording, or other possible means) for commodity circulation or other commercial and profitable purposes.
  • Page 3 Packing List: The packing box contains the following: One UT-6516/UT-6524 switch One AC power cord One User’s Manual One Warranty Card Two L-shaped support to be fixed on the base and other accessories Notes: In case of missing or damage of accessories, please immediately contact the local distributor.
  • Page 4: Table Of Contents

    Contents Chapter 1: Introduction to Manual ..................- 1 - 1.1 Purpose ........................- 1 - 1.2 General Description ....................- 1 - Chapter2: Product Introduction ..................- 2 - 2.1 Product Overview ..................... - 2 - 2.2 Performance & Features ..................- 2 - Chapter 3: Installation Guide ....................
  • Page 5: Chapter 1: Introduction To Manual

    Chapter 1: Introduction to Manual Chapter 1: Introduction to Manual Thank you for buying our UT-6516U/UT-6524 self-adaptive Ethernet switch. The UT-6516U/UT-6524 switch, which is a 10/100M unmanaged Ethernet switch product developed by Shenzhen UTEK Technology Co., Ltd., provides 16/24 self-adaptive RJ45 ports (10/100 M), all of which support wire-speed forwarding and automatic MDI/MDIX function.
  • Page 6: Chapter2: Product Introduction

    MDI/MDIX function. This overcomes the inconvenience in wiring and use, making its installation really “plug and play”. Any port of UT-6516U/UT-6524 may be connected to any port on other network device by either straight-through cable or crossover cable. The UT-6516U/UT-6524 switch adopts energy-efficient technology, making it available to automatically adjust signal strength through detecting the length of network cable and workload and to effectively reduce energy consumption.
  • Page 7: Chapter 3: Installation Guide

    Do not place anything on the switch. The UT-6516U/UT-6524 switch may be installed on a 19-inch standard cabinet in compliance with EIA (Electronic Industries Association). Prior to installation, turn off all connected devices. Mount the L-shaped supports onto both sides (one for each side) of front panel of the switch and fix it with screws.
  • Page 8: Initialization

    Fig.3-2: Fix the switch onto the cabinet 3.2 Initialization The AC power supply 100~240V/50~60Hz is used for UT-6516U/UT-6524 switch. Connect it to the power cord, insert the plug and turn on the power. After startup, the switch will automatically initialize and the LED lamps will appear as below: Once the power is on, all indicator lamps will light up for one second and then go out, indicating the reset of the system.
  • Page 9: Chapter 4: Product Design

    This chapter describes the front panel, rear panel and LED lamps of the switch in detail. 4.1 Front Panel The front panel of UT-6516U/UT-6524 switch consists of switch model, LED lamps and 16/24 ports (10/100 M). Fig.4-1 Front Panel of UT-6516U Switch Fig.4-2 Front Panel of UT-6524 Switch...
  • Page 10 Chapter 4: Product Design Fig.4-4 LED Lamps of UT-6516U Switch Fig.4-5 LED Lamps of UT-6524 Switch PWR lamp (power indicator): After the switch power is on, this lamp will light up in a constant red. If this lamp fails to light up, check whether the power has been properly connected.
  • Page 11 Chapter 4: Product Design Appendix: Detailed Technical Data General Data IEEE 802.3 10Base-T EIA/TIA-568 100 STP Ethernet (100m) IEEE 802.3u Executive 10Base-TX: UTP (max. 100Base-TX Fast Physical Standard length=100M), category #5 Ethernet Medium or above IEEE 802.3 Frame EIA/TIA-568 100 STP type: Transparent (100m) Protocol...

This manual is also suitable for:

Ut-6524

Table of Contents