X, K and Ka band radar guns in use today, but also the laser guns. The RLS2 provides distinct visual and audio alerts to warn you of the presence RADAR-LASER DETECTOR of X, K, Ka band and laser signals for 360°...
Connecting the Power Mounting Type The RLS2 detector is designed to operate on most DC 12V negative ground vehicle electrical systems. The power cord provided with the detector has a There are two ways of installation.
Page 3
b. Press and hold Dim/Menu button for 3sec. OPERATION c. Do nothing for 10sec. 1) Power On & Volume Control 3) Quiet Ride Button Rotate the Power and Volume control wheel clockwise to turn the Power on/off. This wheel can adjust volume up/down also by moving back and forth. Press and release Quiet Ride button to enter Quite Ride Mode.
60~160KPH (in 10kph 33.400 - 36.000 GHz (Ka Superwideband) increments) The RLS2 emits a beeping alert tone accompanied by the visual display blinking Laser Wavelength : 905nm +/-50nm “Slow Down” repeatedly. The alerts will continue until the vehicle’s speed is reduced to below the Speed Operating Temperature Range : Monitor setting.