Summary of Contents for Wahsega Labs WL-SPKR-22-INF-1
- Page 1 2x2 Classroom Ceiling Speaker with InformaCast and SIP ® Installer’s Guide Getting Started This step-by-step guide will help you install your Wahsega ® 2x2 Classroom Ceiling Speaker with InformaCast and SIP.
-
Page 2: What You Will Need
What You Will Need PoE power Power-over-Ethernet (PoE) injector PoE capable switch Remote communication point InformaCast Server Network cable (Cat 5e or Cat 6) www.wahsega.com Page 2... - Page 3 Wiring Your Wahsega Speaker Enlarged Area www.wahsega.com Page 3...
- Page 4 SECOND SPEAKER Connect to a secondary Wahsega speaker up to 20m away via Cat5e or Cat6 cable. Straight cable. Cannot be a crossover cable. WALLPLATE INPUT Currently unavailable. Coming soon! TERMINAL BLOCKS MIC IN + Unused MIC IN - Unused 12 V OUT Fused, nominal 12V output, max 0.5A.
- Page 5 LINE IN + Consumer line input level (-10dBV) LINE IN - Consumer line input level (+10dBV) LED 1 Unused LED 2 Unused INPUT 1 Contact closure to ground (12 V RTN). Connect a Panic Button using Input 1 and 12 V RTN (GND).
- Page 6 Installing in a 2x2 Grid Ceiling Earthquake Tab 1. Lift earthquake tabs until perpendicular to the speaker frame. 2. Carefully angle and lift speaker and place into ceiling grid. 3. Insure that wires and cables are properly connected. 4. Attach earthquake tabs to secure speaker to structure per local building and electrical codes.
- Page 7 Dimensions Length and Width Depth www.wahsega.com Page 7...
- Page 8 Standards Compliant This product is designed and manufactured in the USA. US Patent pending. ROHS compliant Industrial temperature -40C to +85C. www.wahsega.com Page 8...
- Page 9 2x2 Classroom Ceiling Speaker with InformaCast and SIP WL-SPKR-22-INF-1 WL-SPKR-22-INF-2 Installation Guide Rev A 6.22.2016 www.wahsega.com Page 9...