System Updates - Honda Accord 2018 Owner's Manual

AUDIO AND CONNECTIVITY
Models with Display Audio

System Updates

Install authorized updates to the Display Audio system software. Install via a
WiFi connection or a USB storage device.
Wireless Connection Setup
n
These steps are required only for
updating via Wi-Fi.
1. From the Home screen, select
System Updates, then Settings.
2. Select Connection Setup.
3. Select Wi-Fi, then Change Mode.
4. Select Network, then Confirm.
5. Select an access point.
6. Ensure Use this network... is
checked, then select Connect.
Wireless Updating
n
1. From the Home screen, select
System Updates.
2. Select via Wireless
3. Select Download Now.
4. Select Install Now or Install While
Vehicle OFF.
62 |
USB Updating
n
Download the update
1. From the Home screen, select
System Updates, then via USB.
2. Connect a flash drive to the
USB port in the center pocket or
console compartment*. (see p.
48).
3. Once the system finishes copying
to the flash drive, disconnect
the drive and connect it to your
computer.
4. Follow the link to download the update files. See usb.honda.com for
more details.
Install the update
1. From the Home screen, select System Updates, then via USB.
2. Connect the USB device containing the update files to the USB port in
the center pocket or console compartment*.
3. Select Install Now.
Notes
• Honda recommends using a flash drive with 8GB capacity or higher.
AUDIO AND CONNECTIVITY
*if equipped
| 63