Samsung GT-i8000 Service Manual page 86

Exploded View and Parts List
5
1) Separate Connectors that are built to
PBA.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
7 1) In case of wish to separate PBA, first
unscrew 2 bolts and separate Connector.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) Turn over PBA.
2) Separate below Key Connector.
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
8
1) Separate Shieldcan from Clip by using
tweezers.
2) PBA separation picture reference.
1
1) Be careful not to broken FPCB and Wire.
2) Be careful not to make any damage to the Chip parts.
3) Never separate Shieldcan besides SUB PBA
11-2
2