Advertisement
Problem
Machine stops working after long
The blender has overheated
periods of use
While blending on a high speed,
The lid was not secure
the food has spilt out of the container
While blending on a high speed, the
The machine may be overloaded or
food does not circulate
may have trapped an air bubble
Reason
Solution
Please flip the switch to "OFF" and
unplug the power cable from the power
outlet. Remove the blending jar from
the base and free the blades from any
obtrusion NOTE: Do not use your hands
or fingers to remove any obstruction.
Press the black reset button on the
underside of the base as detailed below
Lock the lid to ensure no steam or
splashes escape to avoid possible
burns. Start on a low speed, then slowly
increasing to "MED" and finally "HI".
Carefully remove the lid plug while
making sure the lid stays firmly in place.
Release the air bubble by inserting the
tamper through the lid plug opening.
Lower the speed if circulation problem
persists, then increase the speed once
the food is blending normally.
Advertisement
