Advertisement
B
PROBLEM
Condensation occurs when warm, moist air inside tent comes in contact with cooler outside air. Avoid touching walls to reduce contact leakage. Venting doors and
1. CONDENSATION
windows will reduce condensation. Store wet clothing outside of tent. A battery-powered fan may be helpful. Not applicable to screen houses.
Apply a generous amount of seam-sealer on inside seams. Seam-sealer may be purchased at any local sporting goods store.
2. SEAM LEAKAGE
To avoid mildew, store tent/screen house ONLY when thoroughly dry. However, if mildew occurs use a soft-bristle brush or sponge with mild dishwashing soap or Fels
3. MILDEW
Naptha soap to clean. Let dry thoroughly and a tent-approved water-repellent compound may be applied.
4. REPAIRING A TEAR
For small tears use a self-adhesive patch kit. We recommend a canvas or awning repair shop for larger tears.
5. FAULTY ZIPPER
Zippers are self-repairing. If the zipper separates, you can move the slider to the beginning of the zipper tape and rework the zipper.
Do not leave up in direct sunlight longer than necessary. If left in sunlight for prolonged periods of time, fabric will fade and weaken.
6. FADING FABRIC
A ground cloth under the floor helps prolong its life, provides additional insulation and moisture protection. The cloth should be smaller than the floor to prevent rain
7. FLOOR CONDENSATION
from running under the tent. Not applicable to screen houses.
Stakes should be installed at a 45 angle using a hammer or mallet. Stake loops should be kept taut without over-stretching fabric or webbing. This could cause tears or
8. USE OF STAKES
leakage. To remove safely, use a hammer or stake puller. Do not remove by pulling on the fabric.
B
C
A
TROUBLESHOOTING GUIDE
o
SPECIFICATIONS:
MODEL NO. CTC161207-1 (076-5451-6)
KEY
NO.
DESCRIPTION
A
Fibreglass Pole - Main
B
Fibreglass Pole - Side
C
Fibreglass Pole - Fly
Replacement Fly
Divider
Tent Stakes - Metal
SOLUTION
6 persons
Floor size:
12' x 7' (3.6 x 2.1m)
Centre height:
5'5" (1.6 m)
Weight:
18 lbs 4 oz (8.27 kg)
REPLACEMENT PARTS
PART NO.
HFP11-576f
HFP8.5-405f
HFP6.3 -207t
HTFCTC161207-1
HTDCT161207-1
HMS4-7
QTY.
REQ.
2
2
1
1
1
14
CTC 161207-1 08/15
Advertisement
