CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE WARNING: appliance.
1 Important safety information..................1 2 Table of content......................2 3 Content of the package....................4 4 How to setup Clint H4....................5 5 Main Specifications....................5 6 Front Panel.........................6 7 Rear Side........................6 8 Remote Control......................7 9 DAB/DAB+ Radio mode .....................9 9.1 Search for available DAB stations.................9 9.2 How to choose a DAB station................9...
Page 4
11 System settings.......................13 11.1 Equalizer......................13 11.2 Backlight......................13 11.3 Time and Date settings..................13 11.4 Alarm......................... 13 11.5 Sleep........................14 11.6 Factory Reset......................14 11.7 Info........................14 11.8 Language......................14 12 Service and support....................15 www.clintdigital.com...
Content of the package Congratulations with your new Clint H4. The following is included in the package 4 unit y (AC/DC adaptor) RCA Cable www.clintdigital.com www.clintdigital.com...
How to setup Clint H4 Hi-Fi System Model: H� (CLINT- H�DAB) Hi-Fi Audio adaptor for Model: Clint H3 (Heimdall series) DAB+ and FM WiFi adapter Any questions? www.clintdigital.com DC IN = 5 Volt DC RCA Cable Simply connect the included RCA cable to your existing Hi-Fi system as illustrated above.
Hi-Fi Audio adaptor for DAB+ and FM On the H4 the following I/O connectors are available: (1.Line-Out, RCA Type) (2. DC-input, for power).Furthermore, you will find a telescopic antenna for radio signal reception.(Please adjust antenna for best and optimal reception)
Remote control ON/OFF button Turn ON / OFF Clint H4. (Or disable alarm) Press to enter the Main Menu of H4. Press to turn down the volume level. Press to Mute the sound. Press to turn up the volume level.
Page 9
Press to navigate UP in Menus etc. Arrow UP button Press to navigate DOWN in Menus etc. Arrow DOWN button Arrow LEFT button Press to navigate LEFT in Menus etc. Press to navigate RIGHT in Menus etc. Arrow RIGHT button Number buttons 0-9 Press to directly choose a Stored Station (from Preset) Favorite Button...
Choose DAB radio mode if you want to listen to DAB/DAB+ Radio stations from your area. Switch to DAB mode by pressing Mode button and choose DAB. Notice to place H4 in an area with good signal reception and adjust the telescopic antenna for optimal reception. 9.1 Search for available DAB stations.
9.3 Save a station in Favorite list (Presets) Clint H4 can save up to 20 stations in a favorite list (Presets). If you want to save the station currently being played then Press the button for 2 seconds. Then choose the preferred position by using the button and Press OK.
Notice that by doing so, all existing FM stations in memory will be deleted (overwritten). 10.2 Store (save) a station (Presets) Clint H4 can store up to 20 stations (Favorite stations) in a favorite list (Presets). If you want to store the station currently being played, then press and hold button for 2 seconds.
Time and Date – which is transmitted by the station broadcaster. 10.5 FM Audio settings Clint H4 will automatically playback the Stereo or Mono signal depending on the station being played.You can also force H4 into playing either Mono or Stereo (if available) by changing this setting. www.clintdigital.com...
11. System Settings To change the system settings of H4 press the Menu button, choose System Settings and press OK.In System Settings, you can choose Equalizer, Backlight, Time/Date, Alarm, Sleep, Factory reset, Info and Language. 11.1 Equalizer Change between the different equalizer modes depending on the music you mostly listen to:Normal, Classic, Pop, Jazz or Rock Default setting is Normal.
Sleep setting will automatically shut down H4 after the set time has been reached. You can choose among 15, 30, 45, 60, 75, 90, 105, 120 minutes. When this feature is activated you will notice a bed icon on the LCD display. H4 will enter standby mode once the chosen timeout period occurs.
12 Service and support Should you need any technical support or have questions in general,please always firstly consult your local dealer ,Alternatively ,contact our technical support at help@clintdigital.com. We can help in English or Danish language only . www.clintdigital.com...
Need help?
Do you have a question about the H4 and is the answer not in the manual?
Questions and answers