Audio Playback And Streaming; Hdmi Streaming; The Hdmi Device Setting; Aux Playback - Yinkman Omnos 5.1.2 Quick Start Manual

Audio Playback and Streaming

HDMI Streaming


You can select the HDMI source (either HDMI1 or HDMI2) for the Omnos Soundbar
input through the front panel button or remote controller. Just follow the above
chapters for the HDMI input/output connection and TV-Set settings.

The HDMI Device Setting


For better audio performance, it is recommended to switch to 'raw data' or 'bitstream'
for your HDMI input device. This setting could be under the control page like
[Settings][Audio][Digital Audio Output]. (For the detailed digital audio output
setting, please check your playback device user manual.)

Notice: not all audio format could be streamed, if no sound output, there may be
compatibility between the HDMI source and sink about the 'raw data' or 'bitstream'
format, you can switch back to "PCM" instead, then there'll be audio output.

AUX Playback


You can connect your phone or tablet with a 3.5mm analog cable and switch your
Figure 11. AUX Audio Streaming
13 / 32