Axial Clearance - ABB TPL69-A10 Operation Manual

8.4
8.4
WARNING
CAUTION
© Copyright 2016 ABB. All rights reserved.
Operation Manual / TPL69-A10 / -A30 ... TPL77-A10 / -A30
Disassembly and assembly

Axial clearance

Axial clearance
Physical hazards due to sharp edges on compressor wheel
The compressor wheel has sharp edges which can result in injury.
Wear safety gloves.

Wear safety gloves to protect against mechanical hazards.
Screw on at least four nuts (74027) together with washers (74018),

equally spaced around the circumference, and tighten them to secure
the partition wall axially.
Measure and note the axial clearance (A).

Axial clearance
Clearance A [mm]
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB

Turbocharging Service Station.
8
8.4
TPL69-A TPL73-A
0.33 ... 0.50 0.36 ... 0.53
Page 93
TPL77-A
0.39 ... 0.57