Page 1
This sign means that there are important instructions of operation and handling in the manual that comes with this device. PREMIER CUSTOMER SERVICE 01-900-331-PEJC (7352) Panama: 300-5185 NOTE This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.
SAFETY INSTRUCTIONS Dirty or scratched CD may cause skipping problem. Clean or replace the CD. If an erroneous display or malfunctions occurs, disconnect the AC Cord and remove all the batteries(where applicable) to turn off the display. Then turn the power back on. READ INSTRUCTIONS- All the safety and operating instructions should be read before the appliance is operated.
Page 3
PLAYING THE VIDEO CD To store cassette tapes: Do not store tapes in places which are subjected to direct sunlight, or near equipment BASIC OPERATION that generates heat, keep cassette tapes away from any magnetic field. You can play video CD's with PBC (Version 2.0) function. Before you begin, make sure you've 120-minute cassette tape: connected the system to a TV correctly and firmly.
Page 4
BACK VIEW When the unit is brought from a cold place to a warm place, and there is a large temperature difference. When a heater starts operating. When the unit is brought from an air-conditioned place to a place of high temperature with high humidity.
Page 5
1.SEARCH FORWARD 21.CASSETTE RECORD In tape mode: To start recording In CD/USB/SD mode: To search up during play. The disc will be scanned quickly in forward direction. When playing VCD, each time you press this button the TV screen shows 22.CD DOOR PUSH OPEN orderly Press this to open the CD door...
NOTE: 51.SLOW KEY In VCD/DVD mode: To see the picture in slow motion The battery circuit is disconnected automatically, when the AC cord is inserted to the AC INPUT 52.RESUME KEY socket, then operate by AC. Remove all the batteries from battery compartment, when the unit is In CD mode: To start playback a disc again from where you have stopped no longer operated by battery.
Page 7
Load a CD as described under “Inserting the disc”. OPERATION/MUTE (VCD/MP3): Press STOP(12) to activate stop mode. Press Mute(34) to terminate the sound output. Press again to cancel this mode. Press the PROGRAM KEY (45) following menu appears on TV Screen, “The program menu.
Page 8
TV SYSTEM TV TYPE This product supports output of various system, including NTSC\PAL\PAL60\AUTO. 4:3 PS(Panorama scanning): for commonly size TV. 4:3LB (mail drop): for commonly size TV. 16:9 (wide screen): for wide screen TV. NTSC SOURCE PAL60 SOURCE POWER RESUME AUTO POWER RESUME Press direction key to adjust.
Page 9
SUBTITLE LANGUAGE: using the direction keys to browse, press ENTER key to select your desired option. There are 8 languages in this option: Chinese/ English/ Japanese/ French/ Spanish/ Portuguese/ German. SOURCE POWER RESUME CHINESE PORTUGUESE LANGUAGE SETUP OSD LANGUAGE: using the direction keys to browse, press ENTER key to select your desired option.
Page 10
KEY, press direction key, with key install. CONTRAST: press direction key, to adjust video out contrast. ECHO MIC VOL SHARPNESE HUE, use the direction keys to adjust the hue of the video. ECHO press direction key to adjust ECHO ECHO SHARPNESE MIC VOL MIC VOL press direction key to adjust MIC VOL...
Page 11
Operation of AUX/MP3-IN jack SPEAKER SETUP When slide the function switch to “AUX” position, you can enjoy the music of other audio sources DOWNMIX press direction key to select LT/RT, STEREO, VSS. by AUX/MP3-IN Jack. Insert the supplied AUX-IN 3.5mm plug into AUX/MP3-IN Jack on the rear of the unit. Connect another 3.5mm plug to headphone jack of other audio sources.Play your audio player and the sound will be heard from the portable DVD player, adjust the volume on the unit and your audio player until get the comfortable level.
Page 12
RECORDING FROM RADIO: Specifications Select FUNCTION SWITCH (13) to RADIO. Select desired band & Tune the radio to the desired station. Place a cassette in the deck. Power supply :AC MAINS 110/220V~50/60Hz SUPPLY ( 21 )to start recording. Recording will stop when tape Press RECORD :DC 12V(UM-1 x 8) reaches the end.
Need help?
Do you have a question about the SX-2816DSD and is the answer not in the manual?
Questions and answers