Emfit QS Installation & Operating Instructions Manual page 6

Steps:
1
Select a suitable adapter from the four
alternatives.
3
Connect the power supply to
electrical outlet (110 - 230V AC)
and connect the power cord to
Emfit QS.
Green and red lights start to flash
alternately and device makes
beep sounds.
Note! If only the red led flashes you
need to restore the device into AP
mode. Please see chapter 9 on page 17.
2
Connect the correct adapter to the power
supply and ensure that it locks in its place.
CLICK!
Red
Green
Power cord Sensor cord
Power cord
10
4
With your computing device search for wireless
networks.
5
Connect your computing device to the network:
Emfit_xxxxxx (where xxxxxx is the serial number
of your device).
Ignore possible "No internet connection".
6
Fill in the requested password
(PW: XXX-XXXX-XXX).
Emfit Ltd, Finland | Product: Emfit QS | Model: IP-9360
SN: XXXXXX
PIN: XXXXX
PW: XXX-XXXX-XXX
http://192.168.1.3
Contains FCC ID: W70MRF24WG0MAMB
Contains transmitter module IC:
7693A-24WG0MAMB
Designed and manufactured in Finland.
Windows Mac OSX
Wi-Fi: On
Networks
Turn Wi-Fi Off
Connections
Emfit_1234567
Network Connected
AppleWiFi
Testwork
Wi-Fi
Join Other Network...
Emfit_1234567
Create Network...
Some-Guest-2.4GHz
2WIRE123 Open Network Preferences...
11