Page 3
Good call on picking up the Outdoor Tech Tags wireless earbuds. Your ® experience of the universe will soon be enhanced wirelessly. This manual exists to help make sure that you use them correctly, so you’re definitely going to want to relax for a hot second and look through this.
Page 4
OT BLUETOOTH TAGS - HARDWARE OT Bluetooth Tags are a Bluetooth stereo headset. They support the following Bluetooth profiles: HSP- Headset profile HFP- Hands-free profile A2DP- Advanced audio distribution profile AVRCP- Audio/video remote control profile...
Page 5
POWER/CONNECT Turning the Headset on/off Pairing the headset with Bluetooth devices...
Page 6
FEATURES Pairing with a Bluetooth cell phone or PDA-supported HFP profile allows the following: -Answer a call, end a call or reject a call. -Redial the last number -Voice dial -Adjust the volume -Call transfer between the headset and your Bluetooth cell phone -Microphone mute Pairing with a Bluetooth music device or Bluetooth...
Page 7
PAIRING To pair the headset with a Bluetooth-enabled device: Prior to using the OT Tags for the first time, you will have to pair them with a Bluetooth-enabled device. The pairing procedure may be different for different models of devices. Please refer to your device’s user manual for further information.
Page 8
BATTERY Charging the headset The headset comes with a built-in rechargable battery. It is recommended that you charge the battery fully before using the headset for the first time. When the headset is low on power, a red LED flashes twice and the headset emits three “dong” tones every 30 seconds.
Page 9
Basic calling functionality Music playback functionality...
Page 10
When you’re not using the Tags, twist them up and clip them together. Wear them just like a pair of dog tags until you’re ready to listen to music again. Or go to bed. Or, you know, lean over the fence at the alpaca exhibit.
Need help?
Do you have a question about the TAGS and is the answer not in the manual?
Questions and answers