Summary of Contents for My Child Peachy Changing Unit
Page 1
Peachy Changing Unit This product has been tested to BS EN 12221-1:2008. Suitable for children from birth and up to 15kg/33lbs. IMPORTANT: Retain for future reference. Read carefully.
Page 2
The bath fits only one child at a time. This product complies with BS EN 12221-1:2008 Welcome Thank you for purchasing the MyChild Peachy Changing Unit. Please read the instructions and warnings carefully before use to ensure safe and satisfactory operation of this product. Your child’s safety is your responsibility. If you have a query with this product or require replacement parts, please contact the MyChild Helpline on 0161 335 2508.
Page 3
Parts checklist Contained in your carton are: Part End panels Side frames Top frame Padded top Lower tray Middle trays Bath tub Side trays Bolts Wheels Bath plug Drainage hose Bolt tightening tool page 3...
Page 4
Assembling the changing unit 1. Attach an end panel (A) to the two 2. Place the changing unit on its end and side frames (B) using bolts (C) and then loosely attach the other end panel using tighten using tool (D). four bolts. Do not tighten the bolts on this side yet as you will need to fit another bar between the end panels. 3. With the changing unit on its end, place the ends of the top frame (E) into the sockets on the inside of each end panel. Secure with two bolts, then...
Page 5
Assembling the changing unit (continued) 4. Push the four wheels firmly on to each corner of the changing unit. TIP: If having difficulty attaching the wheels, try using a little liquid soap where the two parts connect, to ease the wheels on. If this does not help, then carefully tap the wheels on with a rubber mallet. NOTE: Ensure all four wheels are locked when using the changing unit. 5. Place the base shelf across the side frame’s lowermost tubing. Wrap flaps (F) around the upright tubing of the two side frames and secure using press studs.
Page 6
Assembling the changing unit (continued) 6. Clip the two side trays (G) together and then hook over the front of the top frame. Place bath tub (H) into the top frame, hooking it over the top frame and the side trays(G). Attach the three middle trays (I) by hooking them over the uppermost tubing of the two side frames. page 6...
Page 7
Attaching the changing unit top The changing unit comes supplied with a removable padded top which can be used on its own or attached to the changing unit. 7. To attach the padded top: Open the clips (A) on the underside of the padded top (B). 45° 8. Standing at the back of the changing unit, angle the hinged wire frame up to 45º and clip the padded top on ensuring the two metal pips (C) are positioned on the inside of the clips. Fasten the clips and lower the padded top. To remove the padded top: Reverse the above steps.
Page 8
Using the changing unit 9. Lock all the wheels by pressing down the brake lever on each wheel. (To unlock the wheels, simply lift up the brake lever on all wheels.) 10. Fasten the changing top using press stud tabs (A) ensuring it is securely attached and lies flat. WARNING: Do not leave your child unattended whilst on the changing unit. Using the bath 11.
Page 9
Using the bath (continued) 12. Before placing water in the bath, ensure the plug (A) is firmly located in the plug-hole on the inside of the bath tub. WARNING: Ensure the water is a safe temperature BEFORE placing your child in the bath. 37°C (98°F) is the recommended temperature. Check with a thermometer. WARNING: Do not use the bath without the changing unit frame.
Care and maintenance Plastic/Metal Parts: Wipe clean using a mild soap and warm water. Dry thoroughly. Never use ammonia based, bleach or spirit cleaners. Do not use abrasive cleaners or abrasive pads. Store away from direct sunlight to avoid fabrics and plastics discolouring. Ensure product is dry before storing. Your 3 year warranty Whilst we make and test our products to the highest standards of durability there’s always a small chance of a hiccup! Our promise is to repair, replace or refund a...
Need help?
Do you have a question about the Peachy Changing Unit and is the answer not in the manual?
Questions and answers