Advertisement
OBJECTIVE
OBJECTIVE
The objective of this document
The objective of
The objective of
this document is to provide
KIT
CONTENTS
ONTENTS
Cube II GPS
GPS
Tracking Device
Tracking Device
1. Select a suitable mounting location under the top dash pad
1.
Select a suitable mounting location under the top dash pad. Ideal locations are directly under th
Select a suitable mounting location under the top dash pad
Select a suitable mounting location under the top dash pad
Select a suitable mounting location under the top dash pad
Select a suitable mounting location under the top dash pad
pad skin, above the g
pad skin, above the glove box, or above the gauge
pad skin, above the g
2. Ensure the "SIM Card Lock" is positioned to the lock per example below.
2.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
Ensure the "SIM Card Lock" is positioned to the lock per example below.
3.
3. WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
WIRING CONNECTIONS. (Make connections, but do not plug into Device)
a. BLACK WIRE
BLACK WIRE
BLACK WIRE chassis Ground, c
b. RED WIRE
RED WIRE 12V+ Constant Input, c
c. WHITE
WHITE WIRE
WIRE connect this wire to the ignition wire
STARTER
STARTER DISABLE
d. GREEN
GREEN WIRE
Wire on the supplied
W
on the supplied SPDT Relay and harness (See
e. YELLOW WIRE
YELLOW WIRE- Test Wire for Starter Disable (optional)
YELLOW WIRE
Technical Support:
Technical Support:
Technical Support: 877-563-
is to provide user with information on how to install
user with information on how to install
user with information on how to install
user with information on how to install the
Power Harness
Power Harness
box, or above the gauge cluster.
box, or above the gauge
chassis Ground, connect to a solid chassis ground.
onnect to a solid chassis ground.
onnect to a solid chassis ground.
onnect to a solid chassis ground.
12V+ Constant Input, connect to a constant 12volt power source.
12V+ Constant Input, c
onnect to a constant 12volt power source.
onnect to a constant 12volt power source.
onnect to a constant 12volt power source.
this wire to the ignition wire.
this wire to the ignition wire
this wire to the ignition wire
IRE- (1 amp negative output)
(1 amp negative output)
(1 amp negative output) Starter Disable output wire. Connect to the Orange
SPDT Relay and harness (See
SPDT Relay and harness (See relay diagram)
SPDT Relay and harness (See
Test Wire for Starter Disable (optional)
Test Wire for Starter Disable (optional)
Test Wire for Starter Disable (optional)
-0012
Relay & Socket
Relay & Socket
Relay & Socket
. Ideal locations are directly under the dash
. Ideal locations are directly under th
. Ideal locations are directly under th
cluster.
Starter Disable output wire. Connect to the Orange
Starter Disable output wire. Connect to the Orange
Starter Disable output wire. Connect to the Orange
Starter Disable output wire. Connect to the Orange
Starter Disable output wire. Connect to the Orange
diagram)
the Cube II GPS device.
Cube II GPS device.
Accessory Kit
Accessory Kit
Page 2
2
Advertisement
