Page 3
CONNECT THE WIRES Connect the transformer to the chair Connect remote control to the chair. Remark: 1. The motor extension cord is attached on the rear rail at the bottom of the seat. 2. The remote control of the actuator (lifting and reclining) has been connected.
REMOTE CONTROL Actuator (lifting and reclining) ●Press and hold the Extended button to raise the chair to full-lift position. ●Press and hold the Retract button to lower the chair to seated position. ●Press and hold the Retract button to raise the legrest and recline the backrest.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following, • Never sit or lean on the remote control and never place heavy objects on the remote control. • Do not put the remote control on floor. •...
Persistent pain could be a symptom of a more serious condition. Care and Maintenance 1. To store • Keep the unit in a clean and dry condition. • For long time storage, cover the chair up to protect from dust.. •...
Page 7
USA 239 Harbor Way South San Francisco, CA 94080 Toll: 800-317-1688 or 650-952-2257 Email: sales@ilivingusa.com...
Need help?
Do you have a question about the ILG-325 and is the answer not in the manual?
Questions and answers