Install Remote Control Batteries
Prepare the Remote Control
The provided Remote Control allows the unit to be operated from a distance.
Even if the Remote Control is operated within the effective range (6m),
•
remote control operation may be impossible if there are any obstacles
between the unit and the remote control.
If the Remote Control is operated near other products which generate
•
infrared rays, or if other remote control devices using infra-red rays are used
near the unit, it may operate incorrectly. Conversely, the other products may
operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab
to activate the remote control battery.
Replace the Remote Control Battery
1 Pull out the battery tray and remove the old battery.
2 Place a new CR2025 battery into the battery tray
with correct polarity (+/-) as indicated.
3 Insert the battery tray back into the slot.
Precautions Concerning Batteries
When the Remote Control is not going to be used for a long time (more than a month), remove the
•
battery from the Remote Control to prevent it from leaking.
If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries
•
with new ones.
Do not use any batteries other than those specified.
•
Do not heat or disassemble batteries.
•
Never throw them in fire or water.
Do not carry or store batteries with other metallic objects as this may cause the batteries to short-cir-
•
cuit, leak or explode.
Never recharge a battery unless it is confirmed to be a rechargeable type.
•
Connections
Using the AUX Connection
-
Use a RCA to RCA stereo audio cable (included) to connect the TV's audio output sockets to the
AUX(R L) socket on the unit.
-
Use a RCA to 3.5mm audio cable (not included) to connect the audio player's headphone socket to
the AUX(R L) socket on the unit.
7
30˚
30˚
Max. 6 m
BT
CD
DOCK
FM
LINE IN
INFO
INTRO
REPEAT
SHUFFLE
MENU
ALBUM/PRESET
VOL
VOL
1
2
3
EQ
4
5
6
BASS
TIMER
7
8
9
SLEEP
DIMMER
0
PROG
CLOCK
Phone
Mp3 Player