Contents Overview ............4 Time mode ............. 24 Use ..............5 Pulse and workout mode ........26 Package contents/device parts ....... 6 Step counter mode ..........28 QR Codes ............7 Distance mode ............29 General information .........8 Calorie mode ............30 Reading and storing the user manual ....8 Active time mode ...........31 Explanation of symbols .........
Page 3
Operation ............39 Activating sleep mode.........53 Switching the display module on ......39 Deactivating sleep mode ........54 Switching the display module off ......40 Restoring the wristband ........54 Setting the time and time mode ......40 Resetting the wristband ........54 Downloading and installing Care and maintenance ........
QR Codes Try it out now Just scan the QR code with your smartphone and find out more about the ALDI product you have purchased. Depending on your tariff plan you may be charged for the connection.
General information General information Reading and storing the user manual This user manual accompanies the wireless activity tracker (referred to below only as the “wristband”). It contains important information on start-up and use. Before using the wristband, read the user manual carefully. This particularly applies to the safety instructions.
General information Explanation of symbols The following symbols and signal words are used in this user manual, on the wristband or on the packaging. This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not WARNING! avoided.
Page 10
General information This symbol provides you with useful supplementary information on assembly or operation. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the Euro- pean Economic Area. Google Play™ and Android™ are trademarks of Google Inc. Apple, the Apple logo, iPad and iPhone are trademarks of Apple Inc., registered in the USA and other countries.
Safety Safety Proper use The wristband is exclusively designed for recording your activity and sleeping habits and for exchanging data with smartphones and tablets. It is designed for collecting data for analysis with the Crane Connect app. You can use this data to help you reach your goals in terms of fitness, level of activity and sleep.
Safety Safety instructions WARNING! Danger of suffocation! Small children or animals may choke on the display module if swallowed. − If the display module is swallowed by children or animals, contact a physician immediately. − Keep the display module away from children and animals. WARNING! Risk of injury! Incorrect operation may result in severe injury.
Page 13
Safety − If you have a pacemaker, be absolutely sure to ask your physician before using the wristband for the first time. WARNING! Danger of explosion! Rechargeable batteries may explode if they are excessively heated up. − Do not heat up the display module. −...
Page 14
Safety WARNING! Danger for children and persons with impaired physical, sensory or men- tal capacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children). − This wristband may be used by children ages eight and over as well as persons with impaired physical, sensory or mental capacities or those lacking experience and knowledge if they are supervised or have been instructed in how to safely use the wristband and have understood the risks associated with operating it.
Page 15
Safety WARNING! Risk of chemical burns from battery acid! Leaking battery acid may lead to chemical burns. − Do not allow battery acid to come into contact with skin, eyes or mucus membranes. − In the event of contact with battery acid, immediately flush the applicable areas with plenty of clean water and consult a physician.
Page 16
Safety CAUTION! Risk of injury! Incorrect operation may result in injury. − Do not use the wristband if it exhibits visible damages. − Do not open the housing of the display module and have qualified professionals perform repairs. Liability and warranty claims are waived in the event of repairs performed by the user or incorrect use.
Page 17
Safety NOTICE! Risk of damage! Improper handling of the wristband may result in damage. − Keep sharp objects away from the wristband. − Store the wristband so that there is no risk of it falling into a tub or sink. −...
Checking the wristband and package contents Avoid strong magnetic fields (e.g. transformers). Otherwise, this may cause fluctua- tions in the transmission of the data measured. Checking the wristband and package contents NOTICE! Risk of damage! If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you may damage the wristband.
Functions 1. Take the wristband out of the packaging. 2. Remove the protective foil from the display 3. Check to make sure that the delivery is complete (see Fig. A). 4. Check whether the wristband or individual parts are damaged. If this is the case, do not use the wristband.
Page 20
Functions • Time • Notifications • Measuring your pulse/workout mode • Steps • Distance • Calories • Active time • Progress check • Recording of sleep cycles with the Crane Connect app (waking up phase, light sleep phase, deep sleep phase) •...
Functions The Crane Connect app provides a detailed view for each target value. It provides you with an itemised view of the daily recorded data. The detail view for sleep mode offers the possibility of displaying your sleep phases (waking, light sleep and deep sleep). Data storage The wristband saves all measured data for seven days.
Functions Modes The wristband has eight different modes you can choose from: Mode Symbol • Time mode no notification • Notification mode • Pulse and workout mode • Step counter mode • Distance mode • Calorie mode...
Functions Mode Symbol • Active time mode • Sleep mode Notification mode In the Crane Connect app, you can select when the wristband should notify you about status messages from your smartphone or tablet. You can choose from incoming calls, calls in your absence, unread messages, unread e-mails and lost connections between the wristband and the paired smartphone/tablet.
Functions Mode Symbol • no notification no notification • call and missed call • message (SMS, Whatsapp, Skype, etc.) • E-mail • Bluetooth® connection interrupted Time mode Time mode is the first mode that appears on the display module. You can switch to the other modes from this mode.
Page 25
Functions To switch modes, push the menu button as follows, starting in time mode: − To switch to notification mode, push the menu button once. − To switch to pulse and workout mode, push the menu button twice. − To switch to step counter mode, push the menu button three times. −...
Functions Pulse and workout mode The wristband measures your pulse as soon as you access this mode. The initial pulse is always 72 beats per minute (bpm). After a few seconds, your current pulse will appear on the display. After 45 seconds, it will stop measuring your pulse and the display will automatically switch off.
Page 27
Functions You can also select further settings in the Crane Connect app. For example, you can only have certain workout data shown on the display. Your current workout data is saved in the pulse and workout mode. At the end of the workout, you can access the workout data for the last workout in pulse and workout mode: −...
Functions To monitor your pulse, the wristband records your pulse over a prolonged period of time. The period of time you defined with the desired interval can be configured or deactivated in the Crane Connect app. Step counter mode The wristband counts the steps you cover in a day. The more steps you cover during one day, the longer the progress bar at the top of the display will become.
Functions Distance mode The wristband determines the distance you cover in one day in miles. The calculation is based on the steps counted and your individual data (step length, height, gender), which the wristband obtains from the Crane Connect app. The greater the distance you cover during one day, the longer the progress bar at the top of the display will become.
Functions Calorie mode The wristband calculates the calories you burn in a day. The calculation is based on your level of activity and your individual data (height, age, gender, weight, duration of sleep, etc.), which the wristband obtains from the Crane Connect app. The more calories you burn during one day, the longer the pro- gress bar at the top of the display will become.
Functions Active time mode The wristband calculates the amount of time you are active in hours and minutes. At 12 midnight, the activity time will automatically reset to zero. Sleep mode The wristband measures your sleep in hours and minutes. The wristband does not automatically recognise that you are sleeping –...
Functions the alarm symbol and current time will be shown in alternation on the display. − Push the menu button to switch off the alarm. Compatible Bluetooth® devices The following devices with Bluetooth® 4.0 or higher are compatible with the wristband and the Crane Connect app: •...
Functions You can find a complete list of supported devices online at www.cranesportsconnect.com/compatibility. Watertightness The following table will tell you in what situation the wristband is waterproof up to 3 bar. Situation Watertight to 3 bar* Rain splashes Washing hands (splash water)
Page 34
Functions Situation Watertight to 3 bar* Showering Bathing/swimming Water sports (e.g. diving) *The specification of bar refers to the air overpressure used in connection with the watertightness test for the wristband in accordance with DIN 8310.
Using the wristband for the first time Using the wristband for the first time Activating the display module for the first time • When you activate the display module, you will feel slight resistance when you push the menu button. However, do not let go of the menu button. •...
Using the wristband for the first time Charging the rechargeable battery (see Fig. B) or out of the clip 1. Take the display module out of the band 2. Insert the display module into the USB charger (see Fig. C). 3. Connect the USB charger e.g. to a computer. You can also use a mains adapter with a USB port to charge it (not included in the package contents).
Page 37
Using the wristband for the first time Symbol Charge status 78–100 % 56–77 % 33–55 % 11–32 % 0–10 % − To determine if the rechargeable battery is completely empty, push the menu button. The symbol will appear on the display for three seconds.
Using the wristband for the first time Inserting the display module − Push the display module into the band or the clip so that it is secure and cannot fall out. You have successfully assembled the wristband and can now use it. Putting on the wristband/clip •...
Operation − Or fasten the clip with the display module e.g. on a trouser pocket, shirt, bra or belt. Operation Switching the display module on Once you have activated the wristband as described in the chapter “Activating the display module for the first time”, the chapter “Switching the display module on” is only relevant when the wristband has been switched off.
Operation Switching the display module off 1. In time mode, push the menu button for 2 seconds. The display will show the icon, “Pair?” and “Off?”. 2. As soon as “Off?” appears, push the menu button to switch the display module off. Setting the time and time mode Time mode indicates the current time.
Page 41
Operation QR code for Android: QR code for iOS: To avoid long download times and the associated costs, it is recommended that you use a Wi-Fi connection for downloads. − Install the Crane Connect app on your smartphone. Follow the step-by-step instructions for this.
Operation Creating a user account To create a user account with the Crane Connect app, proceed as follows: 1. Start the Crane Connect app. 2. Follow the registration instructions step by step. 3. To perform user and product-specific settings, select the icon “All Settings”. 4.
Operation Connecting the wristband with the Crane Connect app Make sure that the Bluetooth® function on your smartphone has been activated. 1. Once the user settings are complete, return to the “All Settings” menu. 2. Select the icon “Activity Tracker”. You can make further settings for optimal use of your wristband.
Page 44
Operation 5. Push the menu button again. “Pairing...” will appear for approx. 20 seconds on the display. During this time, the wristband will connect with your smartphone. Once the connection has been successfully established, the symbol will appear on the display. If the connection cannot be created, the symbol will appear on the display (see chapter “Troubleshooting”).
Operation Configuring notifications 1. On your smartphone or tablet, open the Crane Connect app and access the settings for the wristband. 2. Scroll down to “Alert settings”. 3. Activate the desired notification functions by pushing the corresponding slider to the right ( If you would like to configure how the wristband is to alert you of a notification, push the ar- row to the right of the slider.
Operation Notifications: Symbols and signals To be able to receive notifications, your smartphone or tablet must be within Blue- tooth® range. The wristband will display the last 10 notifications. If a call is received on your smartphone or if you have missed a call, the wristband will notify you with the signals configured in the app.
Operation symbol will appear if you have enabled “Display” in the settings. If the Bluetooth® connection between the wristband and smartphone or tablet is interrupted, the wristband will notify you with the signals configured in the app. symbol will appear if you have enabled “Display” in the settings. Displaying notifications An interrupted Bluetooth®...
Operation 2. Push the menu button again for 2 seconds to display the last 10 notifications. • The notifications will be displayed in chronological order. • Each notification will be shown for 3 seconds. • You can also manually access the notifications by pushing the menu button. •...
Page 49
Operation Without the Crane Connect app, you cannot adjust the factory default targets to your individual goals. The following are set as factory defaults: • Target steps: 10,000 steps • Target distance: 3.5 miles • Calorie consumption: 3,000 kilocalories To set the time, push the reset button at 12 noon.
Operation Activating pulse and workout mode If you start the pulse and workout mode, the initial pulse of 72 bpm is shown. After a few seconds, your current pulse will appear on the display. After 45 seconds, pulse measurement will stop and the display will switch off.
Page 51
Operation 3. To stop your workout, hold the menu button down for 2 seconds. “Stop?” will appear on the display. 4. Push the menu button to stop the workout. “ STOP” will flash on the display for three seconds. You can also access the current workout data while measuring the pulse. For this, the Crane Connect app allows you to select either automatic alternation or manual alternation.
Operation Viewing the workout data Once you have finished your workout, you can view your workout data. The wristband saves the workout data for the last ten workouts recorded. When the workout data is synchronised with the app, it is auto- matically deleted on the wristband.
Operation Activating sleep mode Wear the wristband when you go to bed and activate sleep mode as follows: 1. In sleep mode, hold the menu button down for 2 seconds. “Sleep?” will appear on the display. 2. Push the menu button again to activate sleep mode. icon will appear on the display.
Operation Deactivating sleep mode 1. After waking up, hold the menu button down for approx. two seconds. “Wake?” will appear on the display. 2. Push the menu button to end sleep mode. icon followed by the duration of your last sleep will briefly appear on the display. Restoring the wristband If the wristband does not respond, push the reset button on the back of the display module...
Care and maintenance Care and maintenance Cleaning the wristband NOTICE! Risk of damage! Improperly cleaning may lead to damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles or sharp or metallic cleaning utensils such as knives, hard scrapers and the like. They could damage the surfaces.
Care and maintenance − Let the band and display module air dry completely before storing them. − Make sure that there are no deposits on the optical sensor on the bottom of the device. This will ensure an accurate pulse measurement. Storing the wristband NOTICE! Risk of damage!
Troubleshooting Troubleshooting Use the following information and the FAQs (frequently asked questions) on our website to rec- tify faults yourself: www.cranesportsconnect.com/faq.php Fault Solution Not all of the data measured were If you have not synchronised with the Crane Connect transferred. app in the last 30 days, the data measured prior to then will be overwritten.
Page 58
Troubleshooting Fault Solution The wristband and your smartphone − Switch Bluetooth® off on your smartphone and will not connect. then back on. − Then restart the connection process with your wristband. − Switch your smartphone off and then back on. −...
Declaration of conformity Before you complain about the wristband, please check whether the rechargeable battery is empty and recharge it if necessary. Declaration of conformity Krippl-Watches hereby declares that the Wireless Activity Tracker (model no. AE7-CDAT13A, AE7-CDAT13B, AE7-CDAT13C, AE7-CDAT13D, AE7-CDAT13E) complies with fundamental requirements and other applicable provisions of the RED 2014/53/EU and RoHS 2011/65/EU directives.
Technical data Technical data Wristband Model no.: AE7-CDAT13A, AE7-CDAT13B, AE7-CDAT13C, AE7-CDAT13D, AE7-CDAT13E Article number: 94619 Operating temperature: -10 °C to +50 °C Storage temperature: -10 °C to +50 °C Length of the wristband: approx. 25 cm...
Page 61
Technical data Measurement ranges Pulse 40–225 bpm Steps 0–99999 Calories 0–99999 kcal Distance 0–99.99 miles Workout time 0–09:59:59 Rechargeable battery Type: Lithium polymer rechargeable battery Capacity: 50 mAh Voltage: 3.7 V Charging current: < 25 mA...
Disposal Disposal Disposing of the packaging Dispose of the packaging separated into single type materials. Dispose of paperboard and cardboard with waste paper and films with recyclable waste.
Disposal Disposing of the wristband Old devices must not be disposed of with household waste! This symbol indicates that this product must not be disposed of together with domes- tic waste in compliance with the Directive (2012/19/EU) pertaining to waste electrical and electronic equipment (WEEE).
Page 64
Disposal Batteries and rechargeable batteries may not be disposed of with household waste! As the end user you are required by law to bring all batteries and rechargeable batter- ies, regardless whether they contain harmful substances* or not, to a collection point run by the communal authority or borough or to a retailer, so that they can be dis- posed of in an environmentally friendly manner.
Page 66
In the event of product failure within its intended use over the course of the first 3 years after date of purchase, we will remedy the problem ALDI STORES LTD. PO BOX 26, ATHERSTONE as quickly as possible once it has been brought to our attention.