Polaroid PDM-0990DS Operation Manual page 63

TV Function
Use the ▼、▲ buttons to select the item you want to set.
Use the ►, ◄ buttons to select the item and enter it.
Press the ► button on the remote control to exit the setup menu.
Press the ◄ button on the remote control to return to the picture setup menu.
Signal
Use the ► direction button to select CATV TV signal input mode.
Use the ◄ direction button to select ANT TV signal input mode.
Channel
Use the ►, ◄ buttons to change the channel. In CATV input mode, you can select
channels from 2 to 125; in ANT input mode, you can select channels from 2 to 69.
Blue Screen
This function is only available in no signal input mode.
Use the ► button to turn the function ON, use the ◄ button to turn the function OFF.
Skip
When the ► button is pressed to turn the function ON, it will skip the current channel
Press ▼、▲ to select channels.
When the ◄ button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Fine Tuning
Use the ▼、▲ buttons to select Fine Tuning, and then press the ►, ◄ buttons to
tune forward or backward from the current channel
- 18 -