Getting Started; Finding Your Phone's Serial Number - Kyocera K325 User Manual

1 G S
ETTING TARTED
Finding your phone's serial
number
To activate your Carrier account, you need your
phone's serial number. To locate the number:
1.
Turn your phone off.
2.
Hold your phone face down in your hand.
3.
Place your thumb on the ribs at the top of the
battery door and slide the battery door
downward to remove it.
4.
Remove the battery by pulling back tab at the
top edge of the battery.
5.
Your phone's serial number (the ESN) is
located just below the first barcode inside the
phone, next to the letter "D." It is an
11-digit number.
6.
Write down the ESN.
Installing the battery
Your K325 phone comes with a removable lithium
Fully charge the battery
ion (LiIon) battery.
before using the phone
.
To install the battery:
1.
Hold the phone
face down.
1.
Place your thumb on
the ribs at the top of the
1
battery door and slide the battery door
downward to remove it
2.
Place the battery in the
phone casing with the
metal contacts facing
towards the bottom end
of the phone.
3.
Replace the battery
door by sliding the
notches into the
openings at the bottom
and outside edges of
the battery casing.
4.
Slide the door up to
secure the cover into place.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1.
Connect the AC adapter to
the jack on the bottom of
the phone. Do not force
the AC adapter into the
jack. Make sure the
arrow is face up
as shown.
2.
Plug the adapter into a wall outlet.

Getting Started