Setting The Flash Mode - Polaroid PDC3080 User Manual

• Setting the Flash Mode

The Flash Range is approximately 3.2
feet to 4.9 feet (1 to 1.5 meters).
1. Turn on the camera.
2. Set the camera to Still Image mode.
3. Press Flash
through the flash mode until the
one you want is shown on the LCD
screen.
Flash mode off, the flash does not fire. Use this setting
for outdoor pictures or where flash is prohibited or may be
distracting. Also use when shooting toward a reflective surface,
such as a window or mirror. If you do not have enough light
when using this setting, your pictures will be too dark.
Auto Flash mode, the flash fires automatically as needed. Use
this setting to take most of the pictures.
Flash mode on, the flash fires for every picture. Use this setting
indoors in low light.
Please note that when flash mode is selected, the Status LED turns green
and blinks until the flash finishes charging, then the Status LED will be on
until pressing Shutter button to take a picture.
NOTE:
• Flash modes are not available in Video mode.
• Never touch or block the flash with your fingers. Doing so can soil these
components and interfere with the correct flash operation.
28
button to cycle
Polaroid PDC 3080 Digital Camera User Guide
www.polaroid-digital.com