Polaroid PDC 5070 User Manual page 71

Symptom
I cannot switch on my
PDC 5070 Camera after
inserting a SD card.
I press the shutter button
but no response.
I get a blurred image when
uploading my images to my
computer.
The battery indicator icon
on the 1.5" LCD screen
will go blank.
My image quality is grainy.
My CD installation wizard
does not work.
Polaroid PDC 5070 Digital Camera User Guide
www.polaroid-digital.com
Problem
The SD card is not
inserted all the way in
or card slot door is not
closed properly.
The PDC 5070 camera is
processing data.
Or
The internal memory or
SD card memory is full.
There may be a
momentary delay
between pressing the
shutter button and the
actual exposure.
This means there is
insufficient power.
You may have selected
the wrong camera
frequency setting.
The auto installation file
is switched to off.
Or
The CD ROM is
disconnected.
Solution
Make sure the SD card is inserted
all the way in and close the slot
door properly.
Wait for this process to complete.
Or
Delete some images in the
internal memory of the camera or
in the SD card.
Hold your PDC 5070 camera
steadily until you hear a "beep"
which indicates the exposure is
completed.
You need to change the new
batteries.
Using the different frequency
setting.
Pal for 50 Hz
NTSC for 60 Hz
Go to the computer desktop,
Right click on "My Computer".
Click "Properties". Select "Device
Manager". Double click on "CD-
ROM", double click on "CD-R"
(Normally the manufacturer's
name). Click on " Setting ".
Ensure "Auto insert notification"
is ticked and the "disconnect" is
ticked. If you change the settings
the computer will ask you to
restart your PC. Click "Yes" (Only
for Windows® 98SE & Me user).
71