Table of Contents
Advertisement
Quick Links
I
M
NSTRUCTION
ANUAL
SENSOPTIC FIBER-OPTIC DISPLACEMENT TRANSDUCER
Model FOD
Roctest Limited, 2000. All rights reserved.
This equipment should be installed and operated only by qualified personnel. Its misuse is potentially dangerous. The Company makes no warranty as to the information
furnished in this manual and assumes no liability for damages resulting from the use thereof. The information herein is subject to change without notification.
Tel.: 1.450.465.1113 • 1.877.ROCTEST (Canada, USA) • 33.1.64.06.40.80 (France) • 41.91.610.1800 (Switzerland)
www.roctest.com
E10169-001109
Advertisement
Table of Contents
Related Manuals for ROCTEST FOD
Summary of Contents for ROCTEST FOD
- Page 1 This equipment should be installed and operated only by qualified personnel. Its misuse is potentially dangerous. The Company makes no warranty as to the information furnished in this manual and assumes no liability for damages resulting from the use thereof. The information herein is subject to change without notification. Tel.: 1.450.465.1113 • 1.877.ROCTEST (Canada, USA) • 33.1.64.06.40.80 (France) • 41.91.610.1800 (Switzerland) www.roctest.com...
- Page 2 TABLE OF CONTENTS PRODUCT ....................... 1 1.1 GENERAL ......................1 1.2 DESCRIPTION ..................... 1 1.3 CALIBRATION ...................... 2 1.4 SPECIFICATIONS ....................2 READING PROCEDURE ..................3 2.1 INITIAL READINGS ....................3 2.2 DISPLACEMENT EQUATION ................3 2.3 INTERPRETATION ....................3 INSTALLATION .......................
- Page 3 All Roctest fiber optic readout equipments can read the FOD. Data acquisition systems are also available. Contact manufacturer for more details. The FOD is delivered with a calibration data sheet providing calibration factors to be used in the displacement equation. The displacement equation converts readings units into engineering units.
- Page 4 E10169-001109 With the FOD-J confiuration, both extremities are fixed to ball joint linkages that mate with the anchors. This model is fited with a telescopic plunger free to move in or out of the housing as the distance between the measurement points varies. The FOD-J allows for small latteral displacements.
- Page 5 Please review the readout unit instruction manual before proceeding with the reading. Before a transducer can be used with the fiber-optic readout unit from Roctest, its gage factor (0001000) must be first selected. The gage factor, already recorded in the memory of the readout unit, is registered on a label installed on the cable close to the fiber-optic connector and on the calibration sheet of the gage.
- Page 6 Beginning of range: to measure mostly extension 4 CABLE The gage factor and the serial number corresponding to each FOD are stamped on a tag fastened to the readout end of the cable. In option, the serial number is stamped along the entire length of the cable.
Need help?
Do you have a question about the FOD and is the answer not in the manual?
Questions and answers