Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for VenMill VMI 2500
Summary of Contents for VenMill VMI 2500
- Page 1 Light to Mid-Commercial Use Maximum recommended daily use of 50 repair cycles...
-
Page 2: Table Of Contents
Fan Filter ........................© 2014 VenMill Industries, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of VenMill. Every effort has been made to ensure that the information in this manual is accurate. VenMill is not responsible SECTION 7 for printing or clerical errors. -
Page 3: Unpacking
FOR THIS UNIT WILL CAUSE DAMAGE TO THE UNIT AND WILL VOID On/Off WARRANTY. Parts that need to be saved are as follows: VMI 2500 Shipping Box | Internal Foams (2 foams total) | Outside Foam Left Outside Foam Right | Protective Plastic Bag RS232 Port Power Cord Inlet There is a charge for replacement packing materials (plus S + H). -
Page 4: Initial Setup
SECTION 2 Getting to know your machine Initial Setup SECTION 3 Initial Setup Remove Internal Packing Material Locate the two side panel thumbscrews and unscrew them. Buffing Solution: 250 minutes of operation per bottle Lift the side panel up and away from the machine. -
Page 5: Quick Start
FAILURE TO USE CONSUMABLES DESIGNED FOR THIS UNIT WILL CAUSE DAMAGE TO BOTH UNIT FAILURE TO USE CONSUMABLES DESIGNED FOR THIS UNIT WILL CAUSE DAMAGE TO BOTH UNIT AND DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIZED DISTRIBUTORS VISIT WWW.VENMILL.COM. AND DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIZED DISTRIBUTORS VISIT WWW.VENMILL.COM. -
Page 6: Modes Of Operation
The consumables originally provided with Cleaner the VMI 2500 and the VMI 2500 Combo Packs are all rated for 500 minutes of Over time, the Buffing Wheel will become encased operation. Each configuration is accompanied by a Consumable Counter Chip with dried solution and plastic particles. -
Page 7: Standard Maintenance
SECTION 5 Modes of Operation Standard Maintenance SECTION 6 The asterisk (*) symbol will appear next to the count down time Standard Maintenance to indicate to the Operator that they should consider ordering STAT READY more supplies for their unit. Another indication is provided for COUNT 050* RUBBER PLATTER the Operator during the actual repair cycle itself. -
Page 8: Buffing Wheels
WA R R A N T Y. F O R AU T H O R I Z E D usage on this chip will be displayed on the DISTRIBUTORS VISIT WWW.VENMILL. front LCD Screen. On the “Main Menu”, in COM. -
Page 9: Splash Guard
Buffing Wheel. FAILURE TO USE CONSUMABLES DESIGNED FOR THIS UNIT WILL CAUSE DAMAGE TO BOTH UNIT AND DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIZED DISTRIBUTORS VISIT WWW.VENMILL.COM. -
Page 10: Rubber Platter
RMA form to fill out. Any machine sent in without DISC THEREBY VOIDING YOUR WARRANTY. FOR AUTHORIZED DISTRIBUTORS VISIT WWW.VENMILL.COM. authorization may be denied delivery and will be returned to the customer at their expense. - Page 11 Can I repair a Blu-ray disc? several times to improve the condition covered here, please refer to our website, VMI 2500 Cleaner Disc. If a build up is Yes! Use the Deep Cycle. of the Buffing Wheel. If you do not see www.venmill.com.
-
Page 12: Specifications
To prevent fire or shock hazard, do not expose the unit to rain or moisture. If you have any questions about this product, you may call VenMill Industries • Thermal circuit breaker will shut off power if internal temperature exceeds Customer Service at 800.928.0090 USA, or 866.864.0210 N. - Page 13 TOLL FREE FOR SERVICE OUTSIDE OF NORTH AMERICA PLEASE CALL YOUR REGIONAL DISTRIBUTOR If you are not sure who your regional distributor is please contact sales@venmill.com or visit our Distributors page at www.venmill.com MAILING ADDRESS: VenMill Industries, Inc. 36 Town Forest Rd.
Need help?
Do you have a question about the VMI 2500 and is the answer not in the manual?
Questions and answers