Table of Contents
Advertisement
Menu functions
d
Viewing the
ata counter
From the call log list, press <Options> and select
Call manager → Data counter to view the total
amount of sent or received data.
The following counters are available:
•
Total sent: check the total amount of data you
have sent.
•
Total received: check the total amount of data
you have received.
To reset a counter or all of the counters, press
<Options> and select Reset or Reset all.
If the phone is locked, it will require the password.
The password is preset to 00000000. You can
change this password.
Viewing call cost
From the call log list, press <Options> and select
Call manager → Call costs to view the cost of calls.
This option is available only if supported by your
USIM/SIM card. Note that this is not intended to be
used for billing purposes.
36
p. 100
The following counters are available:
•
Total
cost: check the total cost of all your calls. If
the total cost exceeds the maximum cost set in
Edit cost limit, you must reset the counter before
you can make another call.
•
Last call cost: check the cost of your last call.
•
Call limit: check the maximum cost set.
Press <Options> to access the following options:
•
Reset call cost: reset the cost counters.
•
Edit cost limit: set the maximum cost authorised
for your calls.
•
Setup currency: set the currency that is applied
when the cost of your call is calculated.
Viewing call times
From the call log list, press <Options> and select
Call manager → Call times to view the time log for
calls made and received. The actual time invoiced by
your service provider will vary.
Advertisement
Table of Contents
