Polaroid izone300 User Manual page 72

Symptom
I cannot erase pictures.
AVI file cannot be played.
The camera is detected by the
Windows and works properly.
But a drive letter of the
Removable disk is not created.
There is no response from the
camera while pressing any buttons.
An error message appears on the
LCD screen before or during printing.
Pictures are overexposed or
under exposed.
When connect the camera
to the PC in Capture mode,
Windows prompt to insert
system disk.
Please also refer to the help files & User Guides that accompany the
enclosed applications. For further information and support, please visit
our website: http://www.polaroid.com
72
Problem
All the pictures in memory are protected.
DirectX version is lower than 9.0.
Or
Windows Media player not
installed in the computer
The removable disk crashes with the
network drives.
The LCD screen is frozen or the
camera is hanged.
Printer may not support some
advanced print features.
Or
Some fault occurs with the printer.
Or
Print settings can be configured for
images only.
An incorrect flash mode is applied for shooting.
izone300™ camera driver
installation has not completed.
Polaroid izone300™ Digital Camera User Guide
Solution
Unprotected the pictures you want
to delete.
Install directx 9.0 or above.
Visit http://www.microsoft.com/
directx for more detail.
Or
Please go to
http://www.microsoft.com/windows/
windowsmedia/players.aspx to
download the Windows Media Player
to play the video clips.
Disconnect the crashed network drive
and reserve this drive letter for the
camera.
Depress the Reset button gently
(holding for about 5 seconds) using a
paper clip or ball pen.
Select "DEFAULT" for a particular print
setting or visit http://www.polaroid.com for
the solutions.
Or
Please refer to the printer's user guide for
the solutions.
Or
Make it sure that there is no video clips
or other file format in the current memory
before printing.
Select a correct flash mode for shooting
according to the surrounding lighting conditions.
Insert the Windows CD or izone300™
driver CD. If izone300™ driver CD
is inserted, please set the path to
CD-Rom drive\software\Driver\Sysfile .
And continue the installation.
www.polaroid.com